reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Master UNI Solid Carbide Torus End Mill, TiSiN Coated, 16/1.0 Mm

About The Dimensions similar to DIN 6527. Unequal spacing gives high intrinsic stability and smooth cutting action. optimized substrate for hardness and toughness. recess: 44 mm Recess Dia

of teeth Z: 4 Flute length Lc: 36 mm Corner radius R1: 1 mm Overhang length L1 incl. For roughing and finishing at very high feed rates with smooth cutting action. Special flute profile, large flutes. recess: 44 mm Recess Dia. Advantage: Particularly low vibration running. Newly developed geometry and high-performance coating for outstanding production results and very long tool life with a variety of materials. No. Tolerance: corner radius R1 = ±0.005 mm. optimized substrate for hardness and toughness. D1: 15.5 mm Overall length L: 92 mm Dimensions similar to DIN 6527. Unequal spacing gives high intrinsic stability and smooth cutting action. of teeth Z: 4 Helix angle: 42 degrees Shank: DIN 6535 HB to h6 No. Specially matched edge honing.

Cutting Tools,End Mills,Carbide End Mills

Master UNI Solid Carbide Torus End Mill, TiSiN Coated, 16/1.0 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Master UNI Solid Carbide Torus End Mill, TiSiN Coated, 16/1.0 Mm

Category
Instockinstock

Last Updated

Master UNI Solid Carbide Torus End Mill, TiSiN Coated, 16/1.0 Mm
More Varieties

Rating :- 9.89 /10
Votes :- 1392
Precise concentricity for exact holes.

Precise concentricity for exact holes.

Point geometry with rake angle correction.

    • Recommendation: When using the solid carbide 180 Deg drill it is absolutely essential for process reliability: when spot drilling on flat surfaces to drill a pilot hole 1xD using pilot drill No.
    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    DLC coating sp2 of the latest generation with low coefficient of friction results in outstanding chip clearance.

    • Even if the lathe centers are not in line, good support is provided.

    Even if the lathe centers are not in line, good support is provided.

    .HSS-E Center Drill with Flat, Type R, Uncoated, 3. In the event of angular misalignment of the lathe centre, the ring bearing face avoids the component running only on the external or internal edge of the bearing face.

    • With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Profile ground: High concentricity and pitch accuracy, drills for series production use.HSS Jobber Drill, TiN Coated, 2.

    • With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.
    • Advantage: Particularly low vibration running.
    • 38 mm Height: 10 mm

    38 mm Height: 10 mm

    Cutting direction: right-hand Tolerance class: DIN 13 6g Pitch: 1.

    • Advantage: Particularly low vibration running.

    Advantage: Particularly low vibration running.

    Newly developed geometry and high-performance coating for outstanding production results and very long tool life with a variety of materials. Dimensions similar to DIN 6527.

    • 38 mm Height: 10 mm

    38 mm Height: 10 mm

    M15X1.5 HSS Round Die, Closed/Pre-Slit Form 1 3/4 turns lead chamfer..