reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS Parabolic Drill, Extra Long, Uncoated, DIN 1870 R1/13 Mm

About The 343000-343530. Recommendation: Maximum drilling depth: L2 = LC 1. Large section parabolic flutes, strong due to strengthened core thickness without core taper. Special sturdy drills for extremely deep holes

Large section parabolic flutes, strong due to strengthened core thickness without core taper. Bright finish flutes, nitrided lands, > 16 mm Dia. High concentricity. Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC. Specially treated surface. With point geometry shape A. 343000-343530. Up to approx. Special sturdy drills for extremely deep holes. without drill withdrawal. 15xDia. less than or equal to 16 mm Dia. Note: For suitable reducing adapters for tools with MT shanks see No.

Cutting Tools,Drill Bits,Extra Long Drill Bits

HSS Parabolic Drill, Extra Long, Uncoated, DIN 1870 R1/13 Mm

Cutting Tools,Drill Bits,Extra Long Drill Bits

Specifications of HSS Parabolic Drill, Extra Long, Uncoated, DIN 1870 R1/13 Mm

Category
Instockinstock

Last Updated

HSS Parabolic Drill, Extra Long, Uncoated, DIN 1870 R1/13 Mm
More Varieties

Rating :- 9.92 /10
Votes :- 1392
With point geometry shape A/C from size 2.2 mm.

With point geometry shape A/C from size 2.2 mm.

Ground flutes with high concentricity.

    • equal.

    equal.

    Similar to DIN 6539 extra short.Nominal Dia. Note: Flute length LC = L2 + 1.

    • Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    Solid Carbide Machine Reamer, Uncoated, 6. With long flutes and left-hand helix.No need to procure special collets when using GARANT-NC reamers.

    • For combined production of centering, entry chamfer and tapping hole all in a single operation.

    For combined production of centering, entry chamfer and tapping hole all in a single operation.

    HSS-E Center Drill for Tapping Holes with Flat, Uncoated, For Threads: M10 With additional flats on the shank. Stepped Center drill for tapping holes to Form A..

    • For combined production of centering, entry chamfer and tapping hole all in a single operation.

    For combined production of centering, entry chamfer and tapping hole all in a single operation.

    HSS-E Center Drill for Tapping Holes with Flat, Uncoated, For Threads: M10 With additional flats on the shank.. Stepped Center drill for tapping holes to Form A.