reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide MTC End Mill For Aluminum, Long Reach, Uncoated, 12 Mm

About The recess: 73 mm Recess Dia. h6 No. of teeth Z: 3 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces

Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces. D1: 11 mm Overall length L: 120 mm Shank Dia. Tolerance nominal Dia. of teeth Z: 3 Flute length Lc: 19 mm Overhang length L1 incl. Application: Especially for MTC Multi Task Cutting use on the new generation of turning / milling Centers. of teeth Z: 3 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.5 with HA No. h6 No. recess: 73 mm Recess Dia. Ds: 12 mm

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide MTC End Mill For Aluminum, Long Reach, Uncoated, 12 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide MTC End Mill For Aluminum, Long Reach, Uncoated, 12 Mm

Category
Instockinstock

Last Updated

Solid Carbide MTC End Mill For Aluminum, Long Reach, Uncoated, 12 Mm
More Varieties

Rating :- 9.74 /10
Votes :- 1378
Nominal Dia.

Nominal Dia.

9 mm equal.

    • Straight main cutting edges with optimized cutting edge design for improved chip breaking behavior.
    • Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    With long flutes and left-hand helix. for standard chucking especially in hydraulic chucks or high precision collet chucks. Size 0.No need to procure special collets when using GARANT-NC reamers.

    • Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    98 - 20: Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.No need to procure special collets when using GARANT-NC reamers. for standard chucking especially in hydraulic chucks or high precision collet chucks. Solid Carbide Machine Reamer, Uncoated, 10 mm This ensures the highest concentricity.

    • Note: For milling Woodruff keyways to DIN 6888 or for milling small slots.

    Note: For milling Woodruff keyways to DIN 6888 or for milling small slots.

    Special surface treatment.Woodruff Keyseating Cutter, Uncoated, 10.

    • Designed for deep holes up to 10xD and materials with critical chip formation characteristics.
    • Ds: 12 mm

    Ds: 12 mm

    D1: 11 mm Overall length L: 120 mm Shank Dia.. Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.

    • Tolerances: Corner radius: Radius contour 0 / -0.005 mm.
    • Ds: 12 mm

    Ds: 12 mm

    recess: 73 mm Recess Dia. of teeth Z: 3 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2. Solid Carbide MTC End Mill for Aluminum, Long Reach, Uncoated, 12 mm h6 No. Application: Especially for MTC Multi Task Cutting use on the new generation of turning / milling Centers.

    • Tolerances: Corner radius: Radius contour 0 / -0.005 mm.

    Tolerances: Corner radius: Radius contour 0 / -0.005 mm.

    g: vf = 18000 rpmx fz mm/Zx z No.5 mm Recess Dia.15xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! Solid Carbide Copy Slot Drill, Diamond Coated, 0.