reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Master Steel Solid Carbide Mini End Mill, TiAlN Coated, 0.5 Mm

About The Shank length to DIN for improved support of the tool in the holder. 202291. For HB shanks use order no. of teeth Z: 3 Flute length Lc: 1

For HB shanks use order no. Ds: 3 mm Feed fz for slot milling in steel < 900 N/mm2: 0.002 mm Feed fz for side milling in steel < 900 N/mm2: 0.003 mm This significantly increases the tool life. Note: HB shanks are available at the same price as HA. of teeth Z: 3 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 No. of teeth Z: 3 Flute length Lc: 1.5 mm Overall length L: 38 mm Shank Dia. Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it. Tolerance nominal Dia. Tool for general-purpose machining. Extra short cutter for maximum stability. e8 No. Shank length to DIN for improved support of the tool in the holder. 202291.

Cutting Tools,End Mills,Carbide End Mills

Master Steel Solid Carbide Mini End Mill, TiAlN Coated, 0.5 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Master Steel Solid Carbide Mini End Mill, TiAlN Coated, 0.5 Mm

Category
Instockinstock

Last Updated

Master Steel Solid Carbide Mini End Mill, TiAlN Coated, 0.5 Mm
More Varieties

Rating :- 9.83 /10
Votes :- 1384
Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.
    • Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    Tolerance specifications: Size 0.6 - 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.

    for standard chucking especially in hydraulic chucks or high precision collet chucks.No need to procure special collets when using GARANT-NC reamers.98 - 20: Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.

    • Note: For milling Woodruff keyways to DIN 6888 or for milling small slots.

    Note: For milling Woodruff keyways to DIN 6888 or for milling small slots.

    Peripheral cutting alternate set teeth staggered.5X3 mm The sides of the teeth are ground to give clearance and thus cannot jam in the component.

    • Designed for deep holes up to 10xD and materials with critical chip formation characteristics.

    Designed for deep holes up to 10xD and materials with critical chip formation characteristics.

    Significantly strengthened core without taper. Precision ground point. HSS-E Deep Hole Drill, Uncoated, 4. Recommendation: Maximum drilling depth: L2 = LC 1.

    • Ds: 12 mm

    Ds: 12 mm

    Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces. Application: Especially for MTC Multi Task Cutting use on the new generation of turning / milling Centers.

    • Tolerances: Corner radius: Radius contour 0 / -0.005 mm.

    Tolerances: Corner radius: Radius contour 0 / -0.005 mm.

    Extremely tight tolerances ensure maximum accuracy.15xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! Solid Carbide Copy Slot Drill, Diamond Coated, 0.

    • of teeth Z: 3 Flute length Lc: 1.5 mm Overall length L: 38 mm Shank Dia.

    of teeth Z: 3 Flute length Lc: 1.5 mm Overall length L: 38 mm Shank Dia.

    Ds: 3 mm Feed fz for slot milling in steel < 900 N/mm2: 0. e8 No.

    • End Mill for Plastics - 2 Flute - Square, 0.5000 (1/2), Finish - Machining: Amorphous Diamond

    End Mill for Plastics - 2 Flute - Square, 0.5000 (1/2), Finish - Machining: Amorphous Diamond

    6250" (2-5/8) Length of Cut Carbide Square Upcut End Mill for Plastic, 2 Flutes, Amorphous Diamond Coated.5000" (1/2) Cutter DIA x 2.0.

    • of teeth Z: 3 Flute length Lc: 1.5 mm Overall length L: 38 mm Shank Dia.
    • End Mill for Plastics - 2 Flute - Square, 0.5000 (1/2), Finish - Machining: Amorphous Diamond

    End Mill for Plastics - 2 Flute - Square, 0.5000 (1/2), Finish - Machining: Amorphous Diamond

    6250" (2-5/8) Length of Cut Carbide Square Upcut End Mill for Plastic, 2 Flutes, Amorphous Diamond Coated.5000" (1/2) Cutter DIA x 2.0.