reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS-E Stub Drill, TiAlN Coated, 5.3 Mm

About The 2 4xD on NC machines and automatic machines.. With point geometry shape C from size 2.5 x DC

With point geometry shape C from size 2.4 mm Advantage: Ideal for drilling shallow holes approx. Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC. 2 4xD on NC machines and automatic machines. High concentricity and special chip flutes ensure precise bores.

Cutting Tools,Drill Bits,Stub Drills

HSS-E Stub Drill, TiAlN Coated, 5.3 Mm

Cutting Tools,Drill Bits,Stub Drills

Specifications of HSS-E Stub Drill, TiAlN Coated, 5.3 Mm

Category
Instockinstock

Last Updated

HSS-E Stub Drill, TiAlN Coated, 5.3 Mm
More Varieties

Rating :- 8.23 /10
Votes :- 1426
Through-coolant: no Number of cutting edges Z: 3 Number of cutting edges Z: 3 smallest countersink Dia.
    • A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

    A slim chisel edge and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy.

    2 mm Outstandingly suitable for machines with low power output and high speeds. optimized micro-geometry for increased working life and performance capability. Coating for best wear resistance even at high process temperatures.

    • The sides of the teeth are ground to give clearance and thus cannot jam in the component.
    • Application for type of drilling: for through holes.

    Application for type of drilling: for through holes.

    HSS Adjustable Hand Reamer, 21 mm Fine adjustment using ring gages or micrometers.

    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    92 mm Overall length L: 80 mm of teeth Z: 2 Helix angle: 30 degrees No. Recess angle a = 16 Deg.

    • Note: For reliable use of the micro-drills from 8xD, a pilot hole of at least 4xD is required using the micro-pilot drill 121223.

    Note: For reliable use of the micro-drills from 8xD, a pilot hole of at least 4xD is required using the micro-pilot drill 121223.

    Maximum process reliability due to exactly matched tools within the overall system and expanded guide chamfer. Long-chipping materials may require chips to be evacuated in steps of 3xD each by moving the drill back slightly at pilot hole depth.003 mm, a sufficiently high coolant pressure at least 30 bar, as well as sufficiently fine filtration of the cooling medium DC Please always ensure that the pilot hole is free from chips before using the subsequent drilling tool.

    • Thread type: M Tool material: HSS E PM Standard: Manufacturer's standard Tolerance class: ISO 2X 6HX Thread pitch: 1.25 mm Overall length L: 180 mm Shank Dia.
    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    4 mm Advantage: Ideal for drilling shallow holes approx.HSS-E Stub Drill, TiAlN Coated, 5. 2 4xD on NC machines and automatic machines. High concentricity and special chip flutes ensure precise bores.

    • Thread type: M Tool material: HSS E PM Standard: Manufacturer's standard Tolerance class: ISO 2X 6HX Thread pitch: 1.25 mm Overall length L: 180 mm Shank Dia.
    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    High concentricity and special chip flutes ensure precise bores..3 mm With point geometry shape C from size 2.4 mm Advantage: Ideal for drilling shallow holes approx.