reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS Jobber Drill, Uncoated, 2.15 Mm

About The 15 mm Feed f in steel < 750N/mm2: 0. Note: Size 16 - 20: Drills with shank dia 16 mm.Profile ground: Jobber drill with high pitch accuracy and concentricity as well as precision ground point.8 mm Flute length Lc: 27 mm Overall length L: 53 mm Shank dia Ds: 2

Note: Size 16 - 20: Drills with shank dia 16 mm. Steam tempered from dia 2.4 mm. Profile ground: Jobber drill with high pitch accuracy and concentricity as well as precision ground point. With point geometry shape C from size 4 mm Recommendation: Maximum drilling depth: L2 = LC - 1.5 x DC. Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h8 Point angle: 118 Deg Shank: Plain shank Number of cutting edges Z: 2 recommended maximum drilling depth L2: 23.8 mm Flute length Lc: 27 mm Overall length L: 53 mm Shank dia Ds: 2.15 mm Feed f in steel < 750N/mm2: 0.03 mm/rev.

Cutting Tools,Drill Bits,High Speed Jobber Drill Bits

HSS Jobber Drill, Uncoated, 2.15 Mm

Cutting Tools,Drill Bits,High Speed Jobber Drill Bits

Specifications of HSS Jobber Drill, Uncoated, 2.15 Mm

Category
Instockinstock

Last Updated

HSS Jobber Drill, Uncoated, 2.15 Mm
More Varieties

Rating :- 8.19 /10
Votes :- 1419
Up to 3.7 mm dia with 2 internal cooling channels.

Up to 3.7 mm dia with 2 internal cooling channels.

Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials.

    • Thin walls for access to restricted places.

    Thin walls for access to restricted places.

    9 mm Length: 25 mm Square drive socket with hole to DIN 3120 D 6. 1/4 inch Drive Socket, 6 pt, 12 mm. Material: Chromium vanadium steel Dia drive output end: 16.

    • Of special alloy steel, carefully hardened and stress-relieved.

    Of special alloy steel, carefully hardened and stress-relieved.

    All gage blocks are marked with an individual identification number.Steel Gage Block, Tolerance Class 1, Size: 14 mm Size 11 to 500 cross-section = 35x9 mm..

    • 318896.

    318896.

    With RFID/Balluffchip bore. Mating faces of the PSC internal contour machined. All shanks hard turned for smooth running!. Suitable extensions can be found under No.

    • Application: For clamping tools with MT shank.

    Application: For clamping tools with MT shank.

    . Concentricity: 8 um Overhang dimension A: 45 mm External Diameter D: 25 mm Optional extras: Pull studs PS No.

    • dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    8 even number of teeth and irregular spacing.38 mm Tolerance: H7 Flute length Lc: 14 mm Overhang L1: 29 mm Overall length L: 57 mm Number of cutting edges Z: 4 Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.. Application for type of drilling: for through holes Tolerance: H7 Number of cutting edges Z: 4 Inch nominal dia corresponds to: 2.

    • Steam tempered from dia 2.4 mm.

    Steam tempered from dia 2.4 mm.

    HSS Jobber Drill, Uncoated, 2.5 x DC.8 mm Flute length Lc: 27 mm Overall length L: 53 mm Shank dia Ds: 2.

    • For safety reasons must always be secured using a suitable locking pin and O-ring.

    For safety reasons must always be secured using a suitable locking pin and O-ring.

    Sturdy shape especially for use with electric or compressed air impact wrenches.5 mm Length: 30 mm Material: Chrome molybdenum steel, surface burnished.

    • Steam tempered from dia 2.4 mm.

    Steam tempered from dia 2.4 mm.

    15 mm Note: Size 16 - 20: Drills with shank dia 16 mm.

    • For safety reasons must always be secured using a suitable locking pin and O-ring.

    For safety reasons must always be secured using a suitable locking pin and O-ring.

    Internal square to DIN 3121.5 mm Length: 30 mm Material: Chrome molybdenum steel, surface burnished.