reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Felt Polishing Point, 3 Mm Shank Dia, Type: KU10

About The Long-lived felt polishing point with medium-hard felt which keeps its shape especially well. 552250 / 552330 / 552340 / 555740. Recommended circumferential speed 5 -10 m/s. Degree of hardness: medium Head : 10 mm Head length: 9 mm Shank : 3 mm

Degree of hardness: medium Head : 10 mm Head length: 9 mm Shank : 3 mm Application: For rough polishing and high-gloss finish polishing of ground surfaces where there is a strict requirement for maintaining the exact geometrical shapes. Note: Felt polishing points must be used in conjunction with grinding and polishing pastes such as No. Recommended circumferential speed 5 -10 m/s. 552250 / 552330 / 552340 / 555740. Long-lived felt polishing point with medium-hard felt which keeps its shape especially well.

Deburring Abrasives & Tools,Mounted Points

Felt Polishing Point, 3 Mm Shank Dia, Type: KU10

Deburring Abrasives & Tools,Mounted Points

Specifications of Felt Polishing Point, 3 Mm Shank Dia, Type: KU10

Category
Instockinstock

Last Updated

Felt Polishing Point, 3 Mm Shank Dia, Type: KU10
More Varieties

Rating :- 9.92 /10
Votes :- 1395
Special point geometry.

Special point geometry.

9 mm High bore quality.

    • Very strong, with deep hexagon sockets for projecting threads.

    Very strong, with deep hexagon sockets for projecting threads.

    overall length: 145 mm Hole for tommybar : 6 mm Shaft external hexagon S: 14 mm Standard: hnlich DIN 896 A.

    • Standard: Similar to DIN 5254.

    Standard: Similar to DIN 5254.

    8 mm Material: Chrome vanadium steel, drop-forged and oil-hardened.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    When used to drill deep holes, low feed rates and frequent drill pecks are necessary.. Vaporized from 2. 112103, 112110 and 112160 with 120 Deg tip angle for enhanced process reliability.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Advantage: Especially suitable for long reach purposes.HSS Long Reach Jobber Drill, Uncoated, 8 mm Particularly for deep hole drilling for deep holes, repeated chip evacuation is necessary.