reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Face Mill Arbor With Cooling Channel Bore, HSK-A 63 Short, Clamping Diameter: 40mm

About The Application: For clamping shell end Mills and Milling cutter heads. 309860 / 309861: 40 Suitable toggle wrench No. 309840: 40. Increased collar contact surface

HSK mating faces machined. With RFID/Balluffchip bore. Supplied with: Lock screw Overhang dimension A: 60 mm External Dia D: 88 mm Milling mandrel length L4: 27 mm Spare Milling cutter lock screw No. Application: For clamping shell end Mills and Milling cutter heads. 309860 / 309861: 40 Suitable toggle wrench No. Increased collar contact surface. Clamping Dia 40 with 4 tapped holes for drive blocks to DIN 2079. With Cooling Channel Bores. 309840: 40

Workholding & Machine Tool Accessories,Arbors

Face Mill Arbor With Cooling Channel Bore, HSK-A 63 Short, Clamping Diameter: 40mm

Workholding & Machine Tool Accessories,Arbors

Specifications of Face Mill Arbor With Cooling Channel Bore, HSK-A 63 Short, Clamping Diameter: 40mm

Category
Instockinstock

Last Updated

Face Mill Arbor With Cooling Channel Bore, HSK-A 63 Short, Clamping Diameter: 40mm
More Varieties

Rating :- 9.62 /10
Votes :- 1366
5in BUTT-WELD LONG TEE - POLISHED -316L

5in BUTT-WELD LONG TEE - POLISHED -316L

WAYLAND W67W-5-7 5in BUTT-WELD LONG TEE - POLISHED -316L.

    • For safety reasons must always be secured using a suitable locking pin and O-ring.

    For safety reasons must always be secured using a suitable locking pin and O-ring.

    Sturdy shape especially for use with electric or compressed air impact wrenches. Internal square to DIN 3121. 3/8 inch Drive Impact Socket, Magnetic, 19 mm.With cross hole and snap ring groove for securing sockets.

    • Standard: DIN 3110 / ISO 3318 Material: Chrome vanadium steel, chrome-plated.

    Standard: DIN 3110 / ISO 3318 Material: Chrome vanadium steel, chrome-plated.

    Drop-forged.With close tolerance jaw widths. 610950: Size 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x26, 27x32, 30x34, 36x41 Supplied with: 1 each double open ended wrench No. Double Open End Wrench Set, 13 Pc, 6X7 mm to 36X41 mm.

    • in inches A/F, BSF, BSW and rounded heads can be tightened or loosened using the Surface Drive.

    in inches A/F, BSF, BSW and rounded heads can be tightened or loosened using the Surface Drive.

    Intermediate sizes e. The pressure works directly on the faces of the nuts and bolts, weaker corners are protected.3/8 inch Drive Socket, with Surface Drive, 6 pt, 22 mm Internal square to DIN 3120.

    • Standard: DIN 896 B Material: Heat-treatable steel tube, chrome-plated.

    Standard: DIN 896 B Material: Heat-treatable steel tube, chrome-plated.

    Tubular Box Wrench, 55mm x 60mm overall length: 240 mm Hole for tommybar : 21 mm Made from thin-walled heat-treatable steel tube, with cross-hole for tommy bar..

    • With close tolerance jaw width.

    With close tolerance jaw width.

    Combination Wrench, 15 Deg, Chrome Vanadium Steel, 32 mm Standard: DIN 3113 A / ISO 3318 / ISO 7738 Material: Chrome vanadium steel, phosphated.

    • Please specify required clamping Dia with order.

    Please specify required clamping Dia with order.

    Draw-in Collet, Round, to DIN 6341, 355 E, Clamping Diameter: 18mm square or hexagon on request! F: 20 mm K: 28 mm Overall length L: 123 mm Buttress thread G: S20x2 mm Angle : 17.03 mm D = 30 to 60 mm = 0.

    • 309840: 40

    309840: 40

    With RFID/Balluffchip bore. Face Mill Arbor with Cooling Channel Bore, HSK-A 63 Short, Clamping Diameter: 40mm HSK mating faces machined.

    • Please specify required clamping Dia with order.

    Please specify required clamping Dia with order.

    Draw-in Collet, Round, to DIN 6341, 355 E, Clamping Diameter: 18mm square or hexagon on request! F: 20 mm K: 28 mm Overall length L: 123 mm Buttress thread G: S20x2 mm Angle : 17.03 mm D = 30 to 60 mm = 0. Collets, round profile in 1 mm increments.

    • 309840: 40

    309840: 40

    Application: For clamping shell end Mills and Milling cutter heads.