reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Square End Mill, 6 Mm, Uncoated

About The Through-coolant: no Tolerance nominal dia : e8 No. of teeth Z: 3 Flute length Lc: 12 mm Overall length L: 57 mm Shank dia Ds: 6 mm Feed fz for slot milling in short-chipping aluminium: 0.Eccentric relief ground- additionally finish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces. Application: For roughing and finishing

of teeth Z: 3 Flute length Lc: 12 mm Overall length L: 57 mm Shank dia Ds: 6 mm Feed fz for slot milling in short-chipping aluminium: 0.025 mm Feed fz for side milling in short-chipping aluminium: 0.03 mm Eccentric relief ground- additionally finish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces. of teeth Z: 3 Helix angle: 45 Deg Direction of infeed: horizontal- oblique and vertical Shank: DIN 6535 HA to h6 No. Through-coolant: no Tolerance nominal dia : e8 No. Application: For roughing and finishing.

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Square End Mill, 6 Mm, Uncoated

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Square End Mill, 6 Mm, Uncoated

Category
Instockinstock

Last Updated

Solid Carbide Square End Mill, 6 Mm, Uncoated
More Varieties

Rating :- 8.08 /10
Votes :- 1408
in inches A/F, BSF, BSW and rounded heads can be tightened or loosened using the Surface Drive.
    • Standard: DIN 896 B Material: Heat-treatable steel tube, chrome-plated.

    Standard: DIN 896 B Material: Heat-treatable steel tube, chrome-plated.

    .Tubular Box Wrench, 55mm x 60mm overall length: 240 mm Hole for tommybar : 21 mm Made from thin-walled heat-treatable steel tube, with cross-hole for tommy bar.

    • With close tolerance jaw width.

    With close tolerance jaw width.

    wrench length L: 360 mm maximum jaw height h1: 14 mm maximum ring height h2 max: 21 mm With oval shaft.

    • Please specify required clamping Dia with order.

    Please specify required clamping Dia with order.

    Collets, round profile in 1 mm increments.

    • 309840: 40

    309840: 40

    309860 / 309861: 40 Suitable toggle wrench No. Supplied with: Lock screw Overhang dimension A: 60 mm External Dia D: 88 mm Milling mandrel length L4: 27 mm Spare Milling cutter lock screw No.

    • 308881 309434, ER lock wrench No.

    308881 309434, ER lock wrench No.

    309650.. 309740: 11 Machining strategy: HSC Clamping range: 0.

    • Application: For roughing and finishing.

    Application: For roughing and finishing.

    Solid Carbide Square End Mill, 6 mm, Uncoated of teeth Z: 3 Helix angle: 45 Deg Direction of infeed: horizontal- oblique and vertical Shank: DIN 6535 HA to h6 No.03 mm Through-coolant: no Tolerance nominal dia : e8 No.

    • Up to 2 x D into solid material at very high feed rates and smooth cutting action.

    Up to 2 x D into solid material at very high feed rates and smooth cutting action.

    Master Alu PickPocket Solid Carbide Roughing End Mill, DLC Coated, 18 mm. Advantage: optimized flute form- eccentric relief ground- generous chip spaces.

    • Application: For roughing and finishing.

    Application: For roughing and finishing.

    Eccentric relief ground- additionally finish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.

    • Up to 2 x D into solid material at very high feed rates and smooth cutting action.

    Up to 2 x D into solid material at very high feed rates and smooth cutting action.

    Master Alu PickPocket Solid Carbide Roughing End Mill, DLC Coated, 18 mm.