reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Mini End Mill, TiAlN Coated, 8 Mm

About The 05 mm. Center cutting teeth for plunging.Double relief ground side clearance angle. of teeth Z: 3 Flute length Lc: 13 mm Overall length L: 55 mm Shank Dia

Double relief ground side clearance angle. of teeth Z: 3 Flute length Lc: 13 mm Overall length L: 55 mm Shank Dia. Weldon shank similar to DIN 6535 HB. e8 No. Center cutting teeth for plunging. Through-coolant: no Tolerance nominal Dia. Note: Save on regrinding costs: It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them. of teeth Z: 3 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No. Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Mini End Mill, TiAlN Coated, 8 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Mini End Mill, TiAlN Coated, 8 Mm

Category
Instockinstock

Last Updated

Solid Carbide Mini End Mill, TiAlN Coated, 8 Mm
More Varieties

Rating :- 8.06 /10
Votes :- 1407
For slots or for milling pockets from the component Center.

For slots or for milling pockets from the component Center.

Center cutting edge geometry for plunging.

    • of teeth Z: 3 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HB to h6 No.
    • Ds: 8 mm

    Ds: 8 mm

    D3: 6 mm large Dia. of teeth Z: 4 small Dia.01 mm.

    • The core drill cuts only a thin material ring.

    The core drill cuts only a thin material ring.

    With Weldon shank Dia. Easy to regrind.

    • HSS-E-PM tool material for a high degree of wear resistance.

    HSS-E-PM tool material for a high degree of wear resistance.

    . Universal taps designed for use in a wide spectrum of materials with high process reliability.HSS-E-PM Blind Hole Tap, M6-1 Tap Thread Size, AlTiX Coated Special geometry for optimum swarf evacuation. Tolerance class: 7GX Application: For components which are galvanized or shrink slightly when hardened.

    • Shank Dia.

    Shank Dia.

    Solid Carbide HPC Micro Drill, TiAlN Coated, 2 mm High concentricity, precision ground for HPC applications in steel.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    HSS Drill, Long, Uncoated, 4. Profile ground.

    • Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

    Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

    Weldon shank similar to DIN 6535 HB.of teeth Z: 3 Flute length Lc: 13 mm Overall length L: 55 mm Shank Dia. Through-coolant: no Tolerance nominal Dia. Double relief ground side clearance angle.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    5 mm Improved spot drilling behavior due to cross-ground form. HOLEX CleverDrill Sturdy drill for all standard applications. 112120, 112140 and 112170 with 142 Deg tip angle for enhanced process reliability.HSS Drill, Long, Uncoated, 4.

    • Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

    Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

    of teeth Z: 3 Flute length Lc: 13 mm Overall length L: 55 mm Shank Dia. Weldon shank similar to DIN 6535 HB.