reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS-E-PM Master Form Steel Thread Forming Tap, M4-0.7 Tap Thread Size, TiAlN Coated

About The DIN 2174 DIN 371 less than or equal to M10, DIN 376 M12. optimized polygon geometry for a lower torque. Multi-layer HIPIMS coating for high wear resistance. Tolerance class: 7GX

guide value: 3.7 mm Ds: 4.5 mm Shank square: 3.4 mm Tapping hole Dia. The latest generation of high-performance fluteless taps, specially developed for use in steel materials. Tolerance class: 7GX. HSS-E-PM substrate for exceptional process reliability. Application: For components which are galvanized, or shrink slightly when hardened. optimized polygon geometry for a lower torque. Tolerance class: 7GX Thread pitch: 0.7 mm Overall length L: 63 mm Shank Dia. Multi-layer HIPIMS coating for high wear resistance. DIN 2174 DIN 371 less than or equal to M10, DIN 376 M12.

Cutting Tools,Taps,Thread Forming Taps

HSS-E-PM Master Form Steel Thread Forming Tap, M4-0.7 Tap Thread Size, TiAlN Coated

Cutting Tools,Taps,Thread Forming Taps

Specifications of HSS-E-PM Master Form Steel Thread Forming Tap, M4-0.7 Tap Thread Size, TiAlN Coated

Category
Instockinstock

Last Updated

HSS-E-PM Master Form Steel Thread Forming Tap, M4-0.7 Tap Thread Size, TiAlN Coated
More Varieties

Rating :- 9.62 /10
Votes :- 1367
The core drill cuts only a thin material ring.

The core drill cuts only a thin material ring.

Note: For the lubrication of core drills, we recommend high performance cutting oil.

    • HSS-E-PM tool material for a high degree of wear resistance.

    HSS-E-PM tool material for a high degree of wear resistance.

    Tolerance class: 7GX Application: For components which are galvanized or shrink slightly when hardened.HSS-E-PM Blind Hole Tap, M6-1 Tap Thread Size, AlTiX Coated Special geometry for optimum swarf evacuation. Reduced coefficient of friction due to the new high-performance coating..

    • Shank Dia.

    Shank Dia.

    3 h6 for shrink-fit chucks. Note: Flute length LC = L2 + 1. High performance miniature drill with extra long flutes.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    HOLEX CleverDrill Sturdy drill for all standard applications. Standard core thickness and core taper.5 mm Improved spot drilling behavior due to cross-ground form. 112120, 112140 and 112170 with 142 Deg tip angle for enhanced process reliability.

    • Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

    Ds: 8 mm Shank form: HB Corner chamfer width at 45 Deg: 0.05 mm

    of teeth Z: 3 Flute length Lc: 13 mm Overall length L: 55 mm Shank Dia..

    • Strong spiral point for process stability at high cutting forces.

    Strong spiral point for process stability at high cutting forces.

    HSS-E-PM Through Hole Tap, for High Tensile Strength Steels, M18-1. TiCN coating for maximum wear protection.

    • Tolerance class: 7GX.

    Tolerance class: 7GX.

    7 mm Tolerance class: 7GX Thread pitch: 0.

    • of teeth Z: 4 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.5 with HA No.
    • Tolerance class: 7GX.

    Tolerance class: 7GX.

    Multi-layer HIPIMS coating for high wear resistance. The latest generation of high-performance fluteless taps, specially developed for use in steel materials..4 mm Tapping hole Dia.

    • of teeth Z: 4 Helix angle: 45 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 Balance quality with shank: G 2.5 with HA No.