reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Ball Nose End Mill, TiAlN Coated, 16 Mm

About The 113 mm.01 mm. No. of teeth Z: 3 Helix angle: 35 degrees No

No. Ds: 16 mm Feed fz for side milling in steel < 500 N/mm2: 0.1 mm Feed fz for copy milling in steel < 500 N/mm2: 0.113 mm of teeth Z: 3 Helix angle: 35 degrees No. Tolerance: Radius contour = ±0.01 mm. of teeth Z: 3 Flute length Lc: 26 mm Overall length L: 92 mm Shank Dia.

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Ball Nose End Mill, TiAlN Coated, 16 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Ball Nose End Mill, TiAlN Coated, 16 Mm

Category
Instockinstock

Last Updated

Solid Carbide Ball Nose End Mill, TiAlN Coated, 16 Mm
More Varieties

Rating :- 8 /10
Votes :- 1405
Note: Flute length LC = L2 + 1.5 x DC.

Note: Flute length LC = L2 + 1.5 x DC.

The robust cutter geometry ensures high-performance drilling with good process reliability.

    • This means the profile of the stepped drill is retained even after repeated regrinding.

    This means the profile of the stepped drill is retained even after repeated regrinding.

    Drill and counterbore each with its own chip flutes and guide chamfers.HSS Subland Drill with 180 Deg Countersink Angle, Vaporized, M5 Application: For screw through holes to DIN-ISO 273 and screw head counterbores shape H, J, and K..

    • Straight main cutting edges with optimized cutting edge design for improved chip breaking behavior.
    • optimized polygon geometry for a lower torque.

    optimized polygon geometry for a lower torque.

    Ds: 8 mm Shank square: 6. HSS-E-PM Master Form Steel Thread Forming Tap, 7/16in-14 Tap Thread Size, TiAlN Coated DIN 2174 DIN 371 less than or equal to 3/8, DIN 376 7/16.1.

    • of teeth Z: 4 Flute length Lc: 21 mm Corner radius R1: 1 mm Overhang length L1 incl.

    of teeth Z: 4 Flute length Lc: 21 mm Corner radius R1: 1 mm Overhang length L1 incl.

    Master Ni-Based Solid Carbide Torus End Mill, TiAlN Coated, 8/1.. D1: 7.

    • Advantage: Applicable as finishing cutter with particularly high cutting performance.
    • Designed for deep holes up to 10xD and materials with critical chip formation characteristics.

    Designed for deep holes up to 10xD and materials with critical chip formation characteristics.

    1 mm With specially shaped slots. Significantly strengthened core without taper. 112120, 112140 and 112170 with 142 Deg tip angle for enhanced process reliability.

    • No.

    No.

    1 mm Feed fz for copy milling in steel < 500 N/mm2: 0.

    • Designed for deep holes up to 10xD and materials with critical chip formation characteristics.
    • No.

    No.

    Ds: 16 mm Feed fz for side milling in steel < 500 N/mm2: 0.113 mm of teeth Z: 3 Helix angle: 35 degrees No.