25 Pieces 1/4-20x4-1/2in Hex Tap Bolts Grade 5 Full Thread Zinc, 25PK

312 Steel Hex Rivet Nut Zinc Yellow, 30PK Hex Rivet Nuts are for heavy duty applications with hexagonal holes.

Cotter Pins are simple fasteners that are used to secure a bolt, or any other rod-shaped fastener, in place.

Made in the USA!. Hex Cap Screws feature a washer face under the head, which creates a better seal when applying load.500 Pieces 1/4-20x1/2in Hex Head Cap Screws Grade 8 USA Zinc Yellow, 500PK Grade 8 Hex Cap Screws have 6 radial lines on the head, and can withstand a minimum of 150,000 PSI tensile strength.

.750 Pieces #6x3/4in Phillips Flat Head Wood Screws Zinc Clear, 750PK Wood screws are thread forming screws that have a gimlet point, and a sharp crested, coarse pitch thread.

Phillips Truss Head Machine Screws are a type of screw that have a wide head which provides a larger bearing surface.

20 Pieces 3/8-16x4-1/2in A307 Grade A Carriage Bolts Galvanized, 20PK Carriage bolts have round heads, differentiating them from hex bolts..

These bolts have greater tensile strength than Grade 2 hex bolts, and its yield to tensile ratio is the lowest of all heat-treated steels.Grade 5 Tap Bolts can be distinguished by the 3 dashes l on top of the head of the bolt.

1000 Pieces #8x1-1/2in Stainless Steel Phillips Pan Head Type A Self Tapping Screws, 1000PK Self tapping screws only tap their own thread, so in most cases will require a pilot hole to get started..

Grade 5 Tap Bolts can be distinguished by the 3 dashes l on top of the head of the bolt.These bolts have greater tensile strength than Grade 2 hex bolts, and its yield to tensile ratio is the lowest of all heat-treated steels.

1000 Pieces #8x1-1/2in Stainless Steel Phillips Pan Head Type A Self Tapping Screws, 1000PK Self tapping screws only tap their own thread, so in most cases will require a pilot hole to get started..