HSS-E Clever Tap, M10-1.25 Tap Thread Size, Uncoated

Optional extras: Coolant tube No.

.Tubular Box Wrench Set, 6X7 mm to 16X17 mm Standard: DIN 896 B Material: Heat-treatable steel tube, chrome-plated. Made from thin-walled heat-treatable steel tube, with cross-hole for tommy bar. Supplied with: 1 each box wrench No.

Master Alu SlotMachine Solid Carbide Roughing End Mill, DLC Coated, 16 mm Ramping capability up to 45 Deg. Tolerance nominal Dia.

Drop-forged. wrench length L: 475 mm maximum ring D1 max: 60 mm maximum ring D2 max: 67 mm With oval shaft.

3 mm/rev.05 0.Carbide Turning Insert, Diamond, CC.

Polished flutes for good chip clearance.

HSS-E Clever Tap, M10-1. With spiral point.25 Tap Thread Size, Uncoated HOLEX Clever Tap: Sturdy tap for conventional standard applications.

Solid Carbide Drill, Plain Shank, 180 Deg, TiAlN Coated, 16 mm After spot drilling, the normal feed rate value can be used. Flute geometry for optimum chip evacuation.. when spot drilling on sloping surfaces up to 15 Deg : reduce the feed rate f to 50 %, up to 30 Deg: reduce the feed rate f to 40 % and up to 45 Deg: reduce the feed rate f to 25 % of the stated value.

High-quality HSS-E tool material and geometry for steels.HSS-E Clever Tap, M10-1.25 Tap Thread Size, Uncoated HOLEX Clever Tap: Sturdy tap for conventional standard applications.

Low radial forces even when spot drilling on faces with up to 45 Deg slope.. Special point geometry for generating 180 Deg flat-bottomed holes. Advantage: The 180 Deg point angle permits drilling and counterboring in a single operation.