Suitable for: CNC machines. Optional extras: Positioning aid No. Toolholder for Profile Broaching Tools, 12 mm Diameter, Shank Type: VDI30 293000 and pin wrench No. L: 83 mm Diameter1: 58 mm Diameter2: 68 mm Note: Caution: Always use appropriate slotting tool Diameter .

293000 and pin wrench No. Toolholder for Profile Broaching Tools, 16 mm Diameter, Shank Diameter: 1-1/4 in 293006..

Note: Caution: Always use appropriate slotting tool Diameter . 293008 in the sizes MT2, MT3 and MT4. Drive-out tang for MT shanks can be ordered under No. 293000 and pin wrench No.

Suitable for: Profile broaching holderfor internal profiles No. 293023, 293030, 293073. Profile length tmax: 20 mm L: 17 mm Head length L1: 25.

293008 in the sizes MT2, MT3 and MT4. Drive-out tang for MT shanks can be ordered under No.

293000 and pin wrench No.

293008 in the sizes MK2, MK3 and MK4.

For machining Centers, use the alignment aid No. pre-drilling -Diametermin: 17.

Suitable for: CNC and conventional machines. Note: Caution: Always use appropriate slotting tool Diameter ..

Suitable for automatic lathes. Toolholder for Profile Broaching Tools, 5 mm Diameter, Shank Diameter: 12 mm Other shank connections on request. 293006.

. Optional extras: Positioning aid No. Note: Caution: Always use appropriate slotting tool Diameter .

Rotary Broach Holder,Broach Dia.. .

L: 83 mm Diameter1: 58 mm Diameter2: 83 mm Note: Caution: Always use appropriate slotting tool Diameter .. Toolholder for Profile Broaching Tools, 16 mm Diameter, Shank Type: VDI40 293000 and pin wrench No.

.500 1/2 in, For Use With ROTARY BROACHES Rotary Broach Holder, Overall Length 4 17/32 in, Broach Holder Shank Dia.Rotary Broach Holder,Broach Dia.

03 mm Screw: 290399 1 290397 and a dial indicator to check the spindle orientation. In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability.

22 mm.for slot width 14 mm, minimum pre-drill Diameter = 38. Attention: Always use the minimum pre-drill Diameter to match the slot width e. Keyway Broaching Toolholder, Long, 32 mm Shank Diameter, 12 mm Through-coolant: yes Shank length Ls: 100 mm suitable for slot width m: 12 mm Reach L1: 161 mm Tool holder Diameter1: 30 mm Center offset L3: 16.

Other shank connections on request.

In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability. Keyway Broaching Toolholder, Long, 25 mm Shank Diameter, 10 mm Through-coolant: yes Shank length Ls: 90 mm suitable for slot width m: 10 mm suitable for slot width m: 12 mm Reach L1: 126 mm Tool holder Diameter1: 25 mm Center offset L3: 14 mm Min.

for slot width 14 mm, minimum pre-drill Diameter = 38.5 mm Min.

293008 in the sizes MT2, MT3 and MT4. Optional extras: Positioning aid No. 293000 and pin wrench No.

Optional extras: Positioning aid No.. 293006. 293000 and pin wrench No.

22 mm.for slot width 14 mm, minimum pre-drill Diameter = 38. pre-drilling -Diametermin: 21. Keyway Broaching Toolholder, Short, 20 mm Shank Diameter, 8 mm Through-coolant: yes Shank length Ls: 50 mm suitable for slot width m: 8 mm Reach L1: 48 mm Tool holder Diameter1: 20 mm Center offset L3: 11 mm Min.

Suitable for: CNC and conventional machines. Drive-out tang for MT shanks can be ordered under No.

In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability.

for slot width 14 mm, minimum pre-drill Diameter = 38. 290391, 290393 for exact setting of the Y-coordinate.

.

. 293008 in the sizes MT2, MT3 and MT4.Other shank connections on request. Optional extras: Positioning aid No.

315 8.

290391, 290393 for exact setting of the Y-coordinate. For lathes without Y-axis, please use eccentric bush No..

. Suitable for: CNC machines.Other shank connections on request.