reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

50 Pieces 1/2in-13 Steel Two Way Reversible Hex Lock Nuts Zinc, 50PK

About The This creates slightly distorted center threads resulting in a controlled locking action.Grade 2 Two Way Lock Nuts are a type of lock nut that can be installed in either orientation and have 2-3 indentations compressed onto the flat sides of the nut.

This creates slightly distorted center threads resulting in a controlled locking action. Grade 2 Two Way Lock Nuts are a type of lock nut that can be installed in either orientation and have 2-3 indentations compressed onto the flat sides of the nut.

Nuts,Lock Nuts

50 Pieces 1/2in-13 Steel Two Way Reversible Hex Lock Nuts Zinc, 50PK

Nuts,Lock Nuts

Specifications of 50 Pieces 1/2in-13 Steel Two Way Reversible Hex Lock Nuts Zinc, 50PK

Category
Instockinstock

Last Updated

50 Pieces 1/2in-13 Steel Two Way Reversible Hex Lock Nuts Zinc, 50PK
More Varieties

Rating :- 9.77 /10
Votes :- 1380
100 Pieces M4-0.7x6 Class 12.9 Alloy Button Socket Head Cap Screws Black Oxide, 100PK
    • This helps keep the nut in place, preventing it from loosening over time due to vibrations or wear and tear.

    This helps keep the nut in place, preventing it from loosening over time due to vibrations or wear and tear.

    150 Pieces 5/16in-24 Grade A Nylon Insert Hex Nuts Zinc, 150PK Nylon Insert Lock Nuts are a type of lock nut that has a nylon collar insert - which increases friction on the screw thread.

    • The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer.

    The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer.

    Hex Cap Screws feature a washer face under the head,which creates a better seal when applying load.40 Pieces 1/2in-13x2-1/2in Hex Cap Screws Grade L-9 Bolts USA Zinc Yellow, 40PK Grade L-9 Hex Cap Screws 180,000 PSI Min have 9 radial lines on the head, and on average are 17% stronger then Grade 8. Made in the USA!.

    • You will likely find these bolts in wooden applications in carpentry, allowing you to attach metal to wood.
    • The thin edge of the cup end digs into the contact surface for high holding power.

    The thin edge of the cup end digs into the contact surface for high holding power.

    .500 Pieces 1/4-20x3/8in Stainless Steel Cup Point Allen Socket Set Screw, 500PK Cup Point Set Screws feature a hex drive at one end and a cup-shaped indentation at the other.

    • 100 Pieces #10-24x1-1/4in Slotted Hex Washer Head Type F Thread Cutting Screws Zinc, 100PK

    100 Pieces #10-24x1-1/4in Slotted Hex Washer Head Type F Thread Cutting Screws Zinc, 100PK

    .These screws have an integral washer at the bottom of the headand a point that can cut new threads in a pre-drilled hole -primarily used with metal, plastic, wood and other common materials.

    • This creates slightly distorted center threads resulting in a controlled locking action.

    This creates slightly distorted center threads resulting in a controlled locking action.

    50 Pieces 1/2in-13 Steel Two Way Reversible Hex Lock Nuts Zinc, 50PK Grade 2 Two Way Lock Nuts are a type of lock nut that can be installed in either orientation and have 2-3 indentations compressed onto the flat sides of the nut..

    • 25 Pieces 1/4x3-1/4in Hex Washer Head Concrete Screws Piercing Point Blue Finish, 25PK

    25 Pieces 1/4x3-1/4in Hex Washer Head Concrete Screws Piercing Point Blue Finish, 25PK

    Concrete screws are fasteners used for attaching medium-high load applications into concrete, solid brick, hollow brick or stone surfaces.

    • This creates slightly distorted center threads resulting in a controlled locking action.
    • 25 Pieces 1/4x3-1/4in Hex Washer Head Concrete Screws Piercing Point Blue Finish, 25PK

    25 Pieces 1/4x3-1/4in Hex Washer Head Concrete Screws Piercing Point Blue Finish, 25PK

    Concrete screws are fasteners used for attaching medium-high load applications into concrete, solid brick, hollow brick or stone surfaces..