reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 0.8 X 24 Mm

About The g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no No.2 mm Overhang length L1 incl. of teeth Z: 2 Helix angle: 25 degrees Shank: DIN 6535 HA to h5 No. Recess angle a = 16 Deg

Note: At greater tool overhang lengths, use a reduced value for ap! Ds: 4 mm Double-relief ground 2 chamfers hollow ground for high-precision hard machining. D1 = 0 / -0.01 mm. of teeth Z: 2 Flute length Lc: 1.2 mm Overhang length L1 incl. recess: 24 mm Overall length L: 70 mm Shank Dia. Recess angle a = 16 Deg. e.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no No. Tolerances: Neck Dia. GARANT Diabolo: Special geometry, coating and carbide for hard machining in the high-performance field. of teeth Z: 2 Helix angle: 25 degrees Shank: DIN 6535 HA to h5 No. Suitable even for machining electrolytic copper. Values for: slots milled from solid: ap = 0.05xDxap korr side milling: ap = 0.1xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

Cutting Tools,End Mills,Carbide End Mills

Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 0.8 X 24 Mm

Cutting Tools,End Mills,Carbide End Mills

Specifications of Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 0.8 X 24 Mm

Category
Instockinstock

Last Updated

Diabolo Solid Carbide Micro End Mill For Hard Steels, TiAlN Coated, 0.8 X 24 Mm
More Varieties

Rating :- 9.65 /10
Votes :- 1369
of teeth Z: 4 Flute length Lc: 38 mm Corner radius R1: 4 mm Overhang length L1 incl.

of teeth Z: 4 Flute length Lc: 38 mm Corner radius R1: 4 mm Overhang length L1 incl.

optimized flute form, eccentric relief ground, wide chip space.

    • not generally the speed for the drill outer Dia..

    not generally the speed for the drill outer Dia..

    Sturdy due to short flutes. Application: Point angle 90 Deg for spot drilling and countersinking in one operation when a drill of smaller Dia. 6 mm with HB drive flat.

    • range: 8 31.5 mm

    range: 8 31.5 mm

    color ring: without Dia.

    • Straight main cutting edges with optimized cutting edge design for improved chip breaking behavior.

    Straight main cutting edges with optimized cutting edge design for improved chip breaking behavior.

    Pro INOX Solid Carbide Drill for Stainless Steels, Plain Shank, AlTiN Coated, 8.

    • Through-coolant feed M4 Through-coolant: yes No.

    Through-coolant feed M4 Through-coolant: yes No.

    95 mm Flute length Lc: 51. Increased number of cutting edges.

    • 15 Deg.

    15 Deg.

    45 mm Height: 14 mm For stainless and high-tensile steels.5 mm External Dia.

    • recess: 24 mm Overall length L: 70 mm Shank Dia.

    recess: 24 mm Overall length L: 70 mm Shank Dia.

    g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no No. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.

    • Ds: 4 mm Feed fz for slot milling in short-chipping aluminium: 0.015 mm

    Ds: 4 mm Feed fz for slot milling in short-chipping aluminium: 0.015 mm

    Solid Carbide End Mill, DLC Coated, 4mm Application: Especially for milling aluminium, plunging and contour milling.

    • recess: 24 mm Overall length L: 70 mm Shank Dia.

    recess: 24 mm Overall length L: 70 mm Shank Dia.

    of teeth Z: 2 Helix angle: 25 degrees Shank: DIN 6535 HA to h5 No. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.

    • Ds: 4 mm Feed fz for slot milling in short-chipping aluminium: 0.015 mm