reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS-E-PM Thread Forming Tap, For Synchronized Tapping, M5-0.8 Tap Thread Size, TiN Coated

About The With oil grooves, optimal lubrication effect even in deeper threads.5 2 turns for deep threads with short run-out.8 mm Overall length L: 70 mm Shank Dia.65 mm

guide value: 4.65 mm Ds: 6 mm Shank square: 4.9 mm Tapping hole Dia. Special polygon geometry and shank to DIN 1835-B for machines with synchronized spindle drive. Note: For use on synchronized spindles, the GARANT quick-change tapping chuck No. The multi-function layered coating achieves maximum service life even in high-tensile materials in fixed applications. 338100 338121 with minimum length adjustment MLA ensures the highest process reliability. With oil grooves, optimal lubrication effect even in deeper threads. Tolerance class: ISO 2X 6HX Thread pitch: 0.8 mm Overall length L: 70 mm Shank Dia. The innovative polygon form permits a wide application spectrum. Form E lead-in: 1.5 2 turns for deep threads with short run-out.

Cutting Tools,Taps,Thread Forming Taps

HSS-E-PM Thread Forming Tap, For Synchronized Tapping, M5-0.8 Tap Thread Size, TiN Coated

Nominal Dia.
Center cutting teeth for plunging.
More from GARANT: Ds: 6 Mm Shank Square: 4.9 Mm Tapping Hole Dia.
Search

Cutting Tools,Taps,Thread Forming Taps

Specifications of HSS-E-PM Thread Forming Tap, For Synchronized Tapping, M5-0.8 Tap Thread Size, TiN Coated

Category
Instockinstock

Last Updated

HSS-E-PM Thread Forming Tap, For Synchronized Tapping, M5-0.8 Tap Thread Size, TiN Coated
More Varieties

Rating :- 9.51 /10
Votes :- 1354
Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

Note: For suitable reducing adapters for tools with MT shanks see No.

    • HSS-E-PM tool material for maximum wear resistance.
    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    Pro Steel Solid Carbide Drill, Plain Shank, TiAlN Coated, 5.

    • e8 No.

    e8 No.

    Shank similar to DIN 6535 HB.01 mm of teeth Z: 3 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: HB with h6 No.5 mm Through-coolant: no Tolerance nominal Dia.

    • No.

    No.

    Solid Carbide Deburring Mill, 60 Deg, Uncoated, 12 mm Application: Perfectly suitable for chamfering and deburring component edges and for contouring applications.

    • Center cutting teeth for plunging.

    Center cutting teeth for plunging.

    HSS Co8 Roughing End Mill, Uncoated, 10 mm Universal end mills for profile milling or for plunging. Relief ground knuckle form profile.

    • Note: For use on synchronized spindles, the GARANT quick-change tapping chuck No.

    Note: For use on synchronized spindles, the GARANT quick-change tapping chuck No.

    338100 338121 with minimum length adjustment MLA ensures the highest process reliability.5 2 turns for deep threads with short run-out.

    • Nominal Dia.

    Nominal Dia.

    . and shank Dia. Note: Flute length LC = L2 + 1.

    • Note: For use on synchronized spindles, the GARANT quick-change tapping chuck No.

    Note: For use on synchronized spindles, the GARANT quick-change tapping chuck No.

    8 mm Overall length L: 70 mm Shank Dia. Form E lead-in: 1.5 2 turns for deep threads with short run-out.

    • Nominal Dia.

    Nominal Dia.

    .5 x DC.