reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS Boring Bar, AH08K SDQCL07, For DC 2 Inserts, Left-Hand

About The Boring bar HSS 8/07 mmStandard: Works standard Shank Diameters: 8 mm ISO code toolholder: AH08K SDQCR/L07 Setting angle k: 107.5 degrees suitable indexable insert: DC 0702 Minimum pre-drill Diametermin: 12 mm Center offset L3: 8 mm

Boring bar HSS 8/07 mmStandard: Works standard Shank Diameters: 8 mm ISO code toolholder: AH08K SDQCR/L07 Setting angle k: 107.5 degrees suitable indexable insert: DC 0702 Minimum pre-drill Diametermin: 12 mm Center offset L3: 8 mm

Cutting Tools,Indexable Tools,Indexable Boring Bars

HSS Boring Bar, AH08K SDQCL07, For DC 2 Inserts, Left-Hand

Cutting Tools,Indexable Tools,Indexable Boring Bars

Specifications of HSS Boring Bar, AH08K SDQCL07, For DC 2 Inserts, Left-Hand

Category
Instockinstock

Last Updated

HSS Boring Bar, AH08K SDQCL07, For DC 2 Inserts, Left-Hand
More Varieties

Rating :- 9.97 /10
Votes :- 1400
Indexable Turning Toolholder, SRGCL 1616H10, for RC 10 Inserts, Left-Hand

Indexable Turning Toolholder, SRGCL 1616H10, for RC 10 Inserts, Left-Hand

5 mm Overall length L: 100 mm Pack of insert screws: 269028 2.

    • Cutting speed vc main application: 50 200 m/min

    Cutting speed vc main application: 50 200 m/min

    51 / DCMT11T304, for Stainless Steel DCMT 11T304 HBT130 Grade: HBT130 Chip breaker: MM Cutting depth ap: 0.5 mm Feed f: 0.

    • Steel Boring Bar, A32S SCLCR12, for CC 4 Inserts, Right-Hand

    Steel Boring Bar, A32S SCLCR12, for CC 4 Inserts, Right-Hand

    Boring bar steel 32/12 mmStandard: DIN 8024 Shank Diameters: 32 mm ISO code toolholder: A32S SCLCR/L12 Setting angle k: 95 degrees suitable indexable insert: CC 1204 Minimum pre-drill Diametermin: 40 mm Center offset L3: 22 mm.

    • The optimum chip formation no pointed chips achieves high surface quality in roughing and finishing applications.

    The optimum chip formation no pointed chips achieves high surface quality in roughing and finishing applications.

    . Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.

    • The optimum chip formation no pointed chips achieves high surface quality in roughing and finishing applications.

    The optimum chip formation no pointed chips achieves high surface quality in roughing and finishing applications.

    Shank : 6 mm Shape description: Pointed arch Head : 6 mm Head length: 18 mm Overall length: 55 mm Shank : 6 mm Note: Materials with poor heat conductivity, reduce speed to avoid overheating of the burr and smearing. Master INOX Carbide Burr for Stainless Steel, Coarse, AlTiN Coated, Type: G0618 Application: optimized for use on austenitic, rust-resistant and acid-resistant steels, soft titanium alloys and non-ferrous metals. High material removal rate. With high-performance coating for longer tool life, less heat input, better chip evacuation.