reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Carbide Burr, Z5, Fine, Type: A0616

About The Shank 6 mm. Cylindrical shapeZYA, without end cut. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide. Application: Suitable for use with power tools and industrial robots, on almost all materials

Cylindrical shapeZYA, without end cut. GARANT burrs are manufactured from high performance carbide grades with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Shank : 6 mm Shape description: Cylindrical without end cut Head : 6 mm Head length: 16 mm Overall length: 50 mm Shank : 6 mm For deburring, edge breaking, cleaning, weld and surface preparation. Application: Suitable for use with power tools and industrial robots, on almost all materials. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide. Shank 6 mm.

Deburring Abrasives & Tools,Carbide Burs

Carbide Burr, Z5, Fine, Type: A0616

Sledgehammer with shaped hickory handle.
Up to 3.7 mm dia with 2 internal cooling channels.
More from Shank 6 Mm., GARANT
Search

Deburring Abrasives & Tools,Carbide Burs

Specifications of Carbide Burr, Z5, Fine, Type: A0616

Category
Instockinstock

Last Updated

Carbide Burr, Z5, Fine, Type: A0616
More Varieties

Carbide Burr, Z5, Fine, Type: A0616
Rating :- 8.25 /10
Votes :- 1427
Application: For clamping tools with side flat to DIN 1835 B and DIN 6535 HB.
    • Cutting speed vc main application: 50 300 m/min
    • dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    7 with 3 teeth- dia size 1. With long flutes and left-hand helix. No need to order special collets.2 mm, Uncoated For highest concentricity and process reliability.

    • Up to 3.7 mm dia with 2 internal cooling channels.

    Up to 3.7 mm dia with 2 internal cooling channels.

    9 mm Overall length L: 114 mm Shank dia Ds: 8 mm Feed f in stainless steel > 900N/mm2: 0. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials.12 mm/rev. Cutting chisel edge with high centring accuracy due to strong core and special point geometry.

    • Up to 3.7 mm dia with 2 internal cooling channels.

    Up to 3.7 mm dia with 2 internal cooling channels.

    Solid Carbide Drill, 9/32 inch Dia, 140 Deg Point Angle, TiAlN Coated, Through-Coolant Outstanding chip evacuation due to 4 internal cooling channels from dia 3.. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers.