reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Flap Wheel, Medium, Head Dia X Head Width: 40 Mm X 20 Mm

About The Flap strips of fleece around the shank of the tool. Application: For removal of dirt and oxide layers on metals as well as for matt finishing of Cr-Ni, other stainless steels, and also non-ferrous metals. Fleece impregnated with Aluminium Oxide A. Shank 6 mm

Grinding medium code: A Grit equivalent: 180 recommended speed: 7500 min-1 maximum speed: 14000 min-1 Shank 6 mm. Fleece impregnated with Aluminium Oxide A. Application: For removal of dirt and oxide layers on metals as well as for matt finishing of Cr-Ni, other stainless steels, and also non-ferrous metals. Creates a consistent matt finish. Flap strips of fleece around the shank of the tool.

Sanding Abrasives,Flap Wheels

Flap Wheel, Medium, Head Dia X Head Width: 40 Mm X 20 Mm

Sanding Abrasives,Flap Wheels

Specifications of Flap Wheel, Medium, Head Dia X Head Width: 40 Mm X 20 Mm

Category
Instockinstock

Last Updated

Flap Wheel, Medium, Head Dia X Head Width: 40 Mm X 20 Mm
More Varieties

Rating :- 9.98 /10
Votes :- 1401
309906 size 180.

309906 size 180.

Shrink-fit Holder, PSC 80 Short, Clamping Range: 8mm Optional extras: Shrink-fit holder extensions No.

    • High transmissible torques, providing high process reliability.
    • Through-coolant: no Standard: DIN 338 Tolerance nominal Dia: h8 Point angle: 118 degrees Shank: Three drive flats shank Number of cutting edges Z: 2 recommended maximum drilling depth L2: 58.5 mm Flute length Lc: 69 mm Overall length L: 109 mm Shank Dia Ds: 7 mm Feed f in steel < 750N/mm2: 0.125 mm/rev.

    Through-coolant: no Standard: DIN 338 Tolerance nominal Dia: h8 Point angle: 118 degrees Shank: Three drive flats shank Number of cutting edges Z: 2 recommended maximum drilling depth L2: 58.5 mm Flute length Lc: 69 mm Overall length L: 109 mm Shank Dia Ds: 7 mm Feed f in steel < 750N/mm2: 0.125 mm/rev.

    - Reliable spot drilling without centering or center punching - even on curved surfaces - thanks to innovative ground point.5 x DC. - Oblique drilling possible without any problems after the first level of the drill tip has penetrated the material.

    • For safety reasons must always be secured using a suitable locking pin and O-ring.

    For safety reasons must always be secured using a suitable locking pin and O-ring.

    3/8 inch Drive Impact Bit Socket, 6 mm Internal square to DIN 3121. Square drive: 3/8 in drive end: 25 mm Length: 50 mm Material: Chrome molybdenum steel, surface burnished.. Sturdy shape especially for use with electric or compressed air impact wrenches.

    • Material: Chrome vanadium steel Stock length: 74x29 mm
    • With close tolerance jaw widths.

    With close tolerance jaw widths.

    Double Box Wrench, 75 Deg, Phosphated, 16mm x 18mm Standard: DIN 838 / ISO 3318 Material: Chrome vanadium steel, phosphated..

    • Creates a consistent matt finish.

    Creates a consistent matt finish.

    Grinding medium code: A Grit equivalent: 180 recommended speed: 7500 min-1 maximum speed: 14000 min-1 Application: For removal of dirt and oxide layers on metals as well as for matt finishing of Cr-Ni, other stainless steels, and also non-ferrous metals. Flap Wheel, Medium, Head Dia X Head Width: 40 mm X 20 mm. Fleece impregnated with Aluminium Oxide A. Flap strips of fleece around the shank of the tool.

    • Zirconium Aluminium Oxide ZA.

    Zirconium Aluminium Oxide ZA.

    Only compatible with abrasive sleeve holders. Unsuitable for use with cooling lubricants.

    • Creates a consistent matt finish.

    Creates a consistent matt finish.

    Shank 6 mm. Flap strips of fleece around the shank of the tool. Flap Wheel, Medium, Head Dia X Head Width: 40 mm X 20 mm. Fleece impregnated with Aluminium Oxide A.

    • Zirconium Aluminium Oxide ZA.

    Zirconium Aluminium Oxide ZA.

    . Only compatible with abrasive sleeve holders. The rubber body of the abrasive sleeve holder expands at high speed to hold the abrasive sleeve in place.