reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Steel Boring Bar, A16M SVVCL11, For VC 2 Inserts, Left-Hand

About The Boring bar steel 16/11 mmStandard: Works standard Shank Diameters: 16 mm ISO code toolholder: A16M SVVCR/L11 Setting angle k: 72.5 degrees suitable indexable insert: VC 1103 Minimum pre-drill Diametermin: 23 mm Center offset L3: 14 mm

Boring bar steel 16/11 mmStandard: Works standard Shank Diameters: 16 mm ISO code toolholder: A16M SVVCR/L11 Setting angle k: 72.5 degrees suitable indexable insert: VC 1103 Minimum pre-drill Diametermin: 23 mm Center offset L3: 14 mm

Cutting Tools,Indexable Tools,Indexable Boring Bars

Steel Boring Bar, A16M SVVCL11, For VC 2 Inserts, Left-Hand

Cutting Tools,Indexable Tools,Indexable Boring Bars

Specifications of Steel Boring Bar, A16M SVVCL11, For VC 2 Inserts, Left-Hand

Category
Instockinstock

Last Updated

Steel Boring Bar, A16M SVVCL11, For VC 2 Inserts, Left-Hand
More Varieties

Rating :- 9.94 /10
Votes :- 1399
With close tolerance jaw widths.
    • Creates a consistent matt finish.

    Creates a consistent matt finish.

    Flap strips of fleece around the shank of the tool.

    • Zirconium Aluminium Oxide ZA.

    Zirconium Aluminium Oxide ZA.

    . Only compatible with abrasive sleeve holders. Unsuitable for use with cooling lubricants. ZA Abrasive Sleeve, 36 Grit, Size: 15X30 mm 553600.

    • Application: For blind holes.

    Application: For blind holes.

    Overhang length H: 45 mm Shank square: 16 mm Note: Inserts with slip clutch are supplied with the torque setting for machining steel Rm 600 800 N/mm2.Quick-Change Collet with Safety Slip Clutch, M14-33, Tap Shank Diameter: 20mm The setting can be modified as required by adjusting the nut..

    • Overall length L: 49 mm

    Overall length L: 49 mm

    Not compatible with the CENTRO P precision ER Collet chuck. Integral quick-change device.

    • HSK 40 and 50, Form A and E available ex works by the manufacturer.
    • Clamping nut balanced G 2.5 / 25-000 rpm.

    Clamping nut balanced G 2.5 / 25-000 rpm.

    Application: For clamping tools with plain shank in collets to DIN 6388 Form A and B.

    • Steel Boring Bar, A16M SVVCL11, for VC 2 Inserts, Left-Hand

    Steel Boring Bar, A16M SVVCL11, for VC 2 Inserts, Left-Hand

    5 degrees suitable indexable insert: VC 1103 Minimum pre-drill Diametermin: 23 mm Center offset L3: 14 mm.Boring bar steel 16/11 mmStandard: Works standard Shank Diameters: 16 mm ISO code toolholder: A16M SVVCR/L11 Setting angle k: 72.

    • Clamping nut balanced G 2.5 / 25-000 rpm.

    Clamping nut balanced G 2.5 / 25-000 rpm.

    309670: 2 25 Suitable C-hook pin wrench No. GARANT With RFID / Balluffchip bore.

    • Steel Boring Bar, A16M SVVCL11, for VC 2 Inserts, Left-Hand

    Steel Boring Bar, A16M SVVCL11, for VC 2 Inserts, Left-Hand

    5 degrees suitable indexable insert: VC 1103 Minimum pre-drill Diametermin: 23 mm Center offset L3: 14 mm.