Matte Black Pinnacle 337 Series Adjustable Wall Mount 'H' Back Plate Hinge

Custom finishes are available on request. 36 kg with a maximum door width of 28'' 711 mm. 54 kg with a maximum door width of 32'' 813 mm. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. P1N13 Gasket Pack must be purchased separately for use with 5/16'' 8 mm thick tempered glass. Using three hinges with 5/16'' to 1/2'' glass 8 to 12 mm the hinge will hold up to 120 lbs. Replacement Hardware:P102** - Wall plate replacement screwsP615** - Cover plate replacement screws NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles. Contact the DK Hardware Sales Shower Door Department. CRL Adjustable Pinnacle Series Hinges take our popular Pinnacle Hinge to a new level. For doors pulling outwards only using a clear door jamb, you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb. Adjustment to accommodate the desired angle up to 90 degree is done after the door is installed. Closing Type: Self-Centering when within 15 degree of closed position. Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. By merely tightening the Allen screws your door will self-center to the desired closed position. SPECIFICATIONS: Glass Thickness: 5/16'' 8 mm to 1/2'' 12 mm Tempered Safety Glass Special Feature: Adjustable to any angle up to 90 degree without having to take door down. Using two hinges with 5/16'' to 1/2'' glass 8 to 12 mm the hinge will hold up to 80 lbs. Call for details. Construction: Solid Brass Hinge Swings: 90 degree in and 90 degree out at factory set position. No. The door can swing 90 degree inward and also 90 degree outward adjusting angle from factory set position will reduce 90 degree swing in that direction. Cat.

Door Hardware & Components,Door Hinges,Surface Hinges

Matte Black Pinnacle 337 Series Adjustable Wall Mount 'H' Back Plate Hinge