reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

JW Winco WN36-200-M42X2-125-C Leveling Feet

About The GN 36 machine feet are characterized by their solid construction and large variety. They are used especially on heavy application and large machines.

They are used especially on heavy application and large machines. GN 36 machine feet are characterized by their solid construction and large variety.

Hardware Supplies,Leveling Feet & Pads,Leveling Mounts

JW Winco WN36-200-M42X2-125-C Leveling Feet

Hardware Supplies,Leveling Feet & Pads,Leveling Mounts

Specifications of JW Winco WN36-200-M42X2-125-C Leveling Feet

Category
Instockinstock

Last Updated

JW Winco WN36-200-M42X2-125-C Leveling Feet
More Varieties

Rating :- 8.14 /10
Votes :- 1419
The face of the hub is exactly square to the bore and is made of steel to prevent edge breakage.
    • The clamping force of the clamp onto the tube is achieved via the socket cap screws and hex nuts with nylon insert.

    The clamping force of the clamp onto the tube is achieved via the socket cap screws and hex nuts with nylon insert.

    GN131-B18-B18-2-SW 2-Way Connector Clamp The clamping bores of GN 131 two-way connector clamps are machined and designed for construction tubings.

    • The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.

    The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.

    875-B Socket Set Screw Socket set screws with safety twist ball (types V and VR) are designed so the flat faced ball cannot twist more than a maximum of 9 degrees.GN605-5/16X18-. This allows full clamping of the flat faced ball at all times.

    • The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.

    The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.

    . This allows full clamping of the flat faced ball at all times. GN 605 socket set screws with full ball point (type A) are used in applications where a ball point contact is required.

    • The flat faced moveable ball (type B) allows the clamping or supporting of non-parallel surfaces.