T304 W/Pvc Inserts,8 Pipe Hanger

Glove Holder Clip.

2600, NSF/ANSI 51, Elongation Not Applicable, Full Cure Time 1 day, Maximum Performance Temperature 400 Degrees F, Minimum Performance Temperature -40 Degrees F, Working Time 5 min, For Use On Surface Material Ceramic, Fiberglass, Glass, Metal, Plastic, Porcelain, Rubber, Wood.Silicone Sealant, Color White, Application Kitchen and Bath, Container Size 10 oz, Container Type Cartridge, Resistance Properties Waterproof, Weather Resistant, Sealant Properties Flexible, Standards FDA 21 CFR 177.

Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Fractional Inch, 23/32 in.

56 in, Width 1.Pendant Control Station, Number of Operators 2, Number of Pilot Lights 0, Legend Up/Down, Type of Operator Push Button, Action Momentary/Momentary, Contact Form 2NO, Mechanical Interlock Yes, NEMA Rating 4X, Contact Rating 10A @ 600V AC/5A @ 600V DC, NEMA Contact Rating Designation A600/P600, IP Rating IP65, Mounting Hand Grip or Hanger, Hub 3/8 in to 5/8 in, Height 7.

Item Vacuum Ejector, Maximum Flow Rate 2,294 lpm, Maximum Operating Temperature 250 Degrees F, Maximum Supply Pressure 250 psi, Overall Length 165 mm, Pressure Port Gender Female, Pressure Port Size 1/2 in, Pressure Port Type NPT, Vacuum Port Gender Female, Vacuum Port Size 3/4 in, Vacuum Port Type NPT, Valve Type Rotary, Weight 1,050 g.

Rear Rubber Mats/Black,W80.

T304 W/Pvc Inserts,8" Pipe Hanger T304 W/Pvc Inserts,8 In..

of Speeds 1, Voltage 208-230/460V AC, Full Load Amps 3. 5/8 in 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation Reversible, Motor Enclosure Design Totally Enclosed Air-Over, Motor Mounting Type Rigid Base, Motor Frame Material Steel/Aluminum, Shaft Dia. Motor,1 HP,1725 - 1425,208-230/460V,56H.

T304 W/Pvc Inserts,8" Pipe Hanger T304 W/Pvc Inserts,8 In..

of Speeds 1, Voltage 208-230/460V AC, Full Load Amps 3.5 A, 56H Frame, Usable @ 208V Yes, 60/50 Hz Hz, Motor Service Factor 1.