Shaft,440C SS,0.750 In D,6 In

Knee Pad, Color Black, White, Size Universal, Number of Straps 2, Closure Clip, Strap Material Elastic, Cap Material Plastic, Pad Material Foam, Latex Content Not Applicable, Product Type Knee Pad, Cap Stabilization Non-Stabilizing Cap, Leg Circumference - Maximum 50 cm, Leg Circumference - Minimum 30 cm, Includes Case No Case, Cap Resistance Properties Non-Marking, Cap Swivel Swivel Cap, Cap Flexibility Rigid Cap, 1 Pair.

Circular Paper Chart, Compatible with Manufacturer Model Number AR-100, DR 4200 GP/EV, DR 4300, DR 4311, Compatible with Series Universal, Lowest Generic Number Recorded 0, Minimum DC Current Measurement Not Applicable, Product Type Circular Paper Chart, Strip Chart Length Not Applicable, Grid Color Black, Increment of Variation 1/10, Strip Chart Width Not Applicable, Highest Generic Number Recorded 1, Maximum AC Current Measurement Not Applicable, Maximum AC Voltage Measured Not Applicable.

.

Flap Disc, Abrasive Type Coated, Abrasive Material Zirconia Alumina, Grade Fine, Connector Size 5/8 In.-11, Flap Disc Type Type 27, Overall Diameter 5 in, Series Ovation Attacker, Backing Material Fiberglass, Backing Weight X, Grit 120, Maximum Operating Speed 12,200 RPM.

Suspenders, Color Black, Length Adjustable, Width 2 in, Material Elastic, Webbing, Size Universal, Features Adjustable, Heavy Duty Front and Rear Clips, Heavy Duty Webbing.

087 in, System of Measurement Inch, Drive Hex, Package Quantity 25.

75 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable.Linear Shaft, System of Measurement Inch, Diameter 3/4 in, Shaft Type Solid Shaft, End Type Plain Ends, Core Type Solid, Overall Length 6 in, Surface Hardness - Minimum 50 HRC, Material Stainless Steel, Finish Unfinished, End Thread Size Not Applicable, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum 0.

2 mm, Housing Material Aluminum, Mounting Hole Diameter 8.3 mm, Anodized, Silver, System of Measurement Metric, 40 Series, Double Flanged, For Number of Slots 3, Standard, Flange Thickness 9 mm, Pad Material UHMW Plastic, Compatible Brand and Series 40 Series.

Linear Shaft, System of Measurement Inch, Diameter 3/4 in, Shaft Type Solid Shaft, End Type Plain Ends, Core Type Solid, Overall Length 6 in, Surface Hardness - Minimum 50 HRC, Material Stainless Steel, Finish Unfinished, End Thread Size Not Applicable, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum 0.75 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable.

Linear Bearing, Standard Linear, Overall Height 50.1 mm, Overall Width 103.