reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HiRunER Precision ER Collet Chuck, BT 40, Projection: 70, For ER Collet: 40

About The Optional extras: Pull studs PS No. 309617: 40. 308901 309432, hook wrench 628400 or torque wrench 309749 or 628520. 309757, 309758 for 11M and 16M, ER collets Fahrion No

308760 - 308802, PS wrenches No. 309748, No. Extremely strong holding force up to factor 2 better than the standard ER chuck. 309749: 40 Clamping range: 3 26 mm Overhang dimension A: 70 mm External Dia D: 62 mm Spare ER clamping nut No. 308901 309432, hook wrench 628400 or torque wrench 309749 or 628520. The blue design ring must be removed for Fahrion HP 2um ER collets. Including RFID / Balluffchip bore, high-performance clamping nut up to 25000 rpm. 308901 - 309434. 309617: 40 External and internal tapers are ground. All shanks are hard turned for smooth running. Use it in only combination with Fahrion collets. ER chuck key No. Vibration reduction effect due to 2-part clamping nut. Supplied with: Precision clamping nut. 309757, 309758 for 11M and 16M, ER collets Fahrion No. Optional extras: Pull studs PS No. ER collets No. 308820 - 308835, ER chuck keys No. Application: For clamping tools with plain shank in collets to DIN 6499 Form A and B. Do not use the clamping nut in combination with a sealing washer. Note: Clamps only nominal Dia up to shank Dia tolerance h 10. Advantage: Excellent concentricity in the system chuck + collet + clamping nut, 3um radial run-out with a 2um collet, 6um radial run-out with a 5um collet.

Machining,Collets,Chucks & Accessories,Collet Chucks

HiRunER Precision ER Collet Chuck, BT 40, Projection: 70, For ER Collet: 40

1207..
High transmissible torques, providing high process reliability.
More from ER Chuck Key No.: GARANT
Search

Machining,Collets,Chucks & Accessories,Collet Chucks

Specifications of HiRunER Precision ER Collet Chuck, BT 40, Projection: 70, For ER Collet: 40

Category
Instockinstock

Last Updated

HiRunER Precision ER Collet Chuck, BT 40, Projection: 70, For ER Collet: 40
More Varieties

HiRunER Precision ER Collet Chuck, BT 40, Projection: 70, For ER Collet: 40
Rating :- 9.68 /10
Votes :- 1368
Version: Angled shank- end faces squared and chamfered.
    • With close tolerance jaw width.

    With close tolerance jaw width.

    wrench length L: 266 mm maximum jaw height h1: 8. Drop-forged..Combination Wrench, Long, 15 Deg, 18 mm Standard: DIN 3113 A / ISO 3318 / ISO 7738 Material: Chrome vanadium steel, chrome-plated.

    • Polishing grinding points do not clog even when used on materials prone to clogging.

    Polishing grinding points do not clog even when used on materials prone to clogging.

    Aluminum Oxide Polishing Point, 80 Grit, Diameter: 4 mm Not suitable for sharp edges and rough surfaces.GARANT polishing points are characterised by long service life and quick production of fine, even surface finishes.

    • Application: For tapping in confined places, such as recesses, offsets, sharp edges on jigs, extremely deep internal threads, or directly into casting walls.

    Application: For tapping in confined places, such as recesses, offsets, sharp edges on jigs, extremely deep internal threads, or directly into casting walls.

    The rear part of the extension is to DIN, so that the extension can be mounted in quick-change tapping collets or ER tapping collets with a square drive. The collet is clamped to the tap by hand-tightening the knurled clamping nut..

    • Application: Mainly for external machining.

    Application: Mainly for external machining.

    All functional faces ground. Shape: B h1: 20 mm h2: 29 mm b1: 70 mm b2: 35 mm h5: 28 mm h6: 38 mm Standard: ISO 10889 / DIN 69880 / VDI 3425, Blatt 2.

    • High transmissible torques, providing high process reliability.

    High transmissible torques, providing high process reliability.

    Extremely slim design Extra Slim-contour. Wherever reduced interference contours are required.

    • 308760 - 308802, PS wrenches No.

    308760 - 308802, PS wrenches No.

    Optional extras: Pull studs PS No. External and internal tapers are ground.

    • 1207..

    1207..

    .Indexable Turning Toolholder, CRDNN2525M12su, for RN 4 Inserts, Neutral Functional width L4 neutral holders: 12..5 mm Overhang L1 neutral holders: 34 mm Overall length L neutral holders: 150 mm Shim: 259031 43 Clamping toolholder 25/12 mmStandard: DIN ISO 5610 ISO code toolholder: CRDNN 2525M12 suitable indexable insert: RN.

    • 308760 - 308802, PS wrenches No.

    308760 - 308802, PS wrenches No.

    309749: 40 Clamping range: 3 26 mm Overhang dimension A: 70 mm External Dia D: 62 mm Spare ER clamping nut No. HiRunER Precision ER Collet Chuck, BT 40, Projection: 70, for ER Collet: 40 308820 - 308835, ER chuck keys No. Use it in only combination with Fahrion collets.

    • 1207..

    1207..

    Indexable Turning Toolholder, CRDNN2525M12su, for RN 4 Inserts, Neutral Functional width L4 neutral holders: 12..5 mm Overhang L1 neutral holders: 34 mm Overall length L neutral holders: 150 mm Shim: 259031 43 Clamping toolholder 25/12 mmStandard: DIN ISO 5610 ISO code toolholder: CRDNN 2525M12 suitable indexable insert: RN.