reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS Long Reach Jobber Drill, Uncoated, 3.6 Mm

About The Particularly for deep hole drilling for deep holes, repeated chip evacuation is necessary.4 mm.5 x DC. Note: Suitable NC spotting drills No

Particularly for deep hole drilling for deep holes, repeated chip evacuation is necessary. Vaporized from 2.4 mm. With point geometry shape A from size 4 mm. When used to drill deep holes, low feed rates and frequent drill pecks are necessary. 112103, 112110 and 112160 with 120 Deg tip angle for enhanced process reliability. Advantage: Especially suitable for long reach purposes. Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC. Note: Suitable NC spotting drills No.

Cutting Tools,Drill Bits,Jobber Length Drill Bits

HSS Long Reach Jobber Drill, Uncoated, 3.6 Mm

Cutting Tools,Drill Bits,Jobber Length Drill Bits

Specifications of HSS Long Reach Jobber Drill, Uncoated, 3.6 Mm

Category
Instockinstock

Last Updated

HSS Long Reach Jobber Drill, Uncoated, 3.6 Mm
More Varieties

Rating :- 8.05 /10
Votes :- 1405
Tolerances: Neck Dia.
    • Bore with double spline.

    Bore with double spline.

    4/30 mm Length of brush section H1: 50 mm maximum speed: 3600 min-1 Application: Use on bench grinder or polishing machines, or on machines with flexible drive heads. Wire Wheel Brush, Steel, 250 mm Adaptable to various different mounting bores by use of interchangeable reducing rings supplied.

    • Vibration: damped Bore Dia D1: 12.5 mm Dia D2: 22 mm Reach L1: 125 mm

    Vibration: damped Bore Dia D1: 12.5 mm Dia D2: 22 mm Reach L1: 125 mm

    Densimet Arbor for Screw-in Milling Cutters, Diameter 25 mm, Thread M x Length: M12X181 Shank tolerance h6..

    • Particularly high alignment accuracy due to 4 guide chamfers which stabilize the drill even at extreme depths!
    • Plunge angle of up to 10 Deg possible thanks to generous recess on the front face.

    Plunge angle of up to 10 Deg possible thanks to generous recess on the front face.

    As a result, the tool maintains an extremely stable core. Advantage: The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses.

    • Incl.

    Incl.

    Suitable for: Suitable for discs with extraction holes: 6, 6+1, 8, 8+1, 15, 21, ABRANET. Thread: 5/16 inch Thread: M8 adapter for Bosch, Makita and Festool.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    With point geometry shape A from size 4 mm.4 mm.

    • HSS Boring Bar, AH20R STFCL11, for TC 2 Inserts, Left-Hand

    HSS Boring Bar, AH20R STFCL11, for TC 2 Inserts, Left-Hand

    Boring bar HSS 20/11 mmStandard: Works standard Shank Diameters: 20 mm ISO code toolholder: AH20R STFCR/L11 Setting angle k: 90 degrees suitable indexable insert: TC 1102 Minimum pre-drill Diametermin: 23 mm Center offset L3: 13 mm.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    With point geometry shape A from size 4 mm..HSS Long Reach Jobber Drill, Uncoated, 3.

    • HSS Boring Bar, AH20R STFCL11, for TC 2 Inserts, Left-Hand

    HSS Boring Bar, AH20R STFCL11, for TC 2 Inserts, Left-Hand

    Boring bar HSS 20/11 mmStandard: Works standard Shank Diameters: 20 mm ISO code toolholder: AH20R STFCR/L11 Setting angle k: 90 degrees suitable indexable insert: TC 1102 Minimum pre-drill Diametermin: 23 mm Center offset L3: 13 mm.