Spiral Wound Gasket With Graphite Filler, 4, 1/8 Thick, #150

1 in, Color Yellow, Finish Powder Coated, Overall Height 45 1/4 in, Installed Height 45 1/4 in, Weight 15 lb, Outside Diameter 2 1/6 in, Includes Mounting Hardware Not Included, Number of Mounting Holes 3, Mounting Hole Diameter 5/8 in, Locking System Not Applicable, Product Type Spring Mount, Cap Adjustability Fixed, Reflectivity Non-Reflective.

Quick Disc,Insulated,T1003C,Package Quantity 100, Package Quantity 100.

, Base Type Water, Resin Type Epoxy Acrylic, Color White, Finish Flat, VOC Content 0 g/L, Exposure Conditions Moderate, Dry Time 1 to 2 hr, Cure Time 2 hr, Activator Properties Low VOC.

Cotter Pin,0.148 in dia,3.1, Package Quantity 25.8.

4 psi, Filtration Area 371 sq cm, Air Particle Retention 99.Mini Capsule, Product Type Filter Capsule, Housing Material Polypropylene, Autoclavable Yes, Maximum Operating Pressure 3.

,15W.Clip Fan,6 In.

Spiral Wound Flange Gasket, For Flange ANSI Class 150, For Pipe Size 4 in, Inside Diameter 5 in, Outside Diameter 6 7/8 in, Thickness 3/16 in, Filler Material Graphite, Outer Ring Material Carbon Steel, Minimum Operating Temperature -300 Degrees F, Maximum Operating Temperature 1,200 Degrees F, Spiral Winding Material Stainless Steel, Spiral Winding Stainless Steel Grade 304, Inner Ring Stainless Steel Grade Not Applicable, Standards ASME B16.20, Market Industrial, System of Measurement Inch.

Viton Strip, Material Viton, Shape Strip, Grade Standard, Length 4 2/3 ft, Width 1/2 in, Thickness 1/8 in, Backing Type Adhesive, Cell Type Closed Cell, Adhesive Type Acrylic, Number of Adhesive Sides 1, Color Black, Density 15 lb/cu ft, Maximum Temperature 400 Degrees F, Minimum Temperature -15 Degrees F, Maximum Adhesive Temperature 500 Degrees F, Minimum Adhesive Temperature -100 Degrees F, Tensile Strength 100 psi, Texture Smooth, Firmness @ 25 Percent Deflection 7 psi, Material Skin None.

Spiral Wound Flange Gasket, For Flange ANSI Class 150, For Pipe Size 4 in, Inside Diameter 5 in, Outside Diameter 6 7/8 in, Thickness 3/16 in, Filler Material Graphite, Outer Ring Material Carbon Steel, Minimum Operating Temperature -300 Degrees F, Maximum Operating Temperature 1,200 Degrees F, Spiral Winding Material Stainless Steel, Spiral Winding Stainless Steel Grade 304, Inner Ring Stainless Steel Grade Not Applicable, Standards ASME B16.20, Market Industrial, System of Measurement Inch.

Viton Strip, Material Viton, Shape Strip, Grade Standard, Length 4 2/3 ft, Width 1/2 in, Thickness 1/8 in, Backing Type Adhesive, Cell Type Closed Cell, Adhesive Type Acrylic, Number of Adhesive Sides 1, Color Black, Density 15 lb/cu ft, Maximum Temperature 400 Degrees F, Minimum Temperature -15 Degrees F, Maximum Adhesive Temperature 500 Degrees F, Minimum Adhesive Temperature -100 Degrees F, Tensile Strength 100 psi, Texture Smooth, Firmness @ 25 Percent Deflection 7 psi, Material Skin None.