Keyway Broaching Toolholder, Long, 25 Mm Shank Diameter, 12 Mm
About The 22 mm. Note: Individual holder sizes are for different slot widths. for slot width 14 mm, minimum pre-drill Diameter = 38.g
pre-drilling -Diametermin: 32.56 mm Screw: 290399 3 Through-coolant: yes Shank length Ls: 90 mm suitable for slot width m: 12 mm Reach L1: 161 mm Tool holder Diameter1: 30 mm Center offset L3: 16.5 mm Min. Attention: Always use the minimum pre-drill Diameter to match the slot width e.g. 290391, 290393 for exact setting of the Y-coordinate. In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability. For machining Centers, use the alignment aid No. for slot width 14 mm, minimum pre-drill Diameter = 38.22 mm. 290397 and a dial indicator to check the spindle orientation. Note: Individual holder sizes are for different slot widths. For lathes without Y-axis, please use eccentric bush No.
Cutting Tools,Broaches,Broach Holders
Keyway Broaching Toolholder, Long, 25 Mm Shank Diameter, 12 Mm
Cutting Tools,Broaches,Broach Holders
Specifications of Keyway Broaching Toolholder, Long, 25 Mm Shank Diameter, 12 Mm | |
|---|---|
| Category | |
| Instock | instock |
