225 Pieces #6x1/2in Stainless Steel Square Pan Head Type A Self Tapping Screws, 225PK

Wire Rope, Material 304 Stainless Steel, Core Type IWRC, Working Load Limit 100 lb, Breaking Strength 500 lbf, Rope Strand Classification 1 x 7, Cable Diameter 1/16 in, Overall Diameter 1/16 in, Overall Length 250 ft, Bend Radius Not Applicable, End Type Plain, Lubrication Unlubricated, Color Silver, Lifting Capability For Lifting, Coating Uncoated, Coating Type Not Applicable, Minimum Operating Temperature Not Applicable, Maximum Operating Temperature Not Applicable.

.Cone point set screws have a sharp, cone-shaped point that wedges into the contact material thus delivering the strongest torsional and axial holding power of all the set screw styles.

These bolts have greater tensile strength than Grade 2 hex bolts, and its yield to tensile ratio is the lowest of all heat-treated steels.

Jam Nuts are typically half as tall as a standard nut and commonly used as a type of locknut, where it is jammed up against a standard nut to lock the two in place..

.Phillips Pan Head machine screws have a pan-shaped head with a flat top and vertical sidesand are commonly used in electronics.

.10 Pieces 3/4in-16 Grade A Nylon Insert Hex Jam Nuts Zinc, 10PK This helps keep the nut in place, preventing it from loosening over time due to vibrations or wear and tear. Jam Nuts are typically half as tall as a standard nut and commonly used as a type of locknut, where it is jammed up against a standard nut to lock the two in place.

.

.15 Pieces 1/2in-20 Grade 8 Hex Nylon Insert Lock Nuts Zinc Yellow, 15PK Nylon Insert Lock Nuts are a type of lock nut that has a nylon collar insert - which increases friction on the screw thread.

.225 Pieces #6x1/2in Stainless Steel Square Pan Head Type A Self Tapping Screws, 225PK Self tapping screws only tap their own thread, so in most cases will require a pilot hole to get started.

15 Pieces 1/2in-20 Grade 8 Hex Nylon Insert Lock Nuts Zinc Yellow, 15PK Nylon Insert Lock Nuts are a type of lock nut that has a nylon collar insert - which increases friction on the screw thread..