Diabolo Solid Carbide Copy Slot Drill, For Hard Steels, TiAlN Coated, 0.8X10 Mm
About The 01 mm. Note: At greater tool overhang lengths, use a reduced value for ap! values for: copying: ap = 0. Recess angle a = 16 Deg.005 mm
e.g: vf = 18000 rpmx fz mm/Zx z No. of teeth Z: 2 Helix angle: 30 degrees No. Recess angle a = 16 Deg. values for: copying: ap = 0.05xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! Suitable even for machining electrolytic copper. Tolerances: Corner radius: Radius contour = 0 / -0.005 mm. of teeth Z: 2 Flute length Lc: 0.64 mm Corner radius R1: 0.4 mm Overhang length L1 incl. D1: 0.77 mm Overall length L: 50 mm Note: At greater tool overhang lengths, use a reduced value for ap! Neck Dia. recess: 10 mm Recess Dia. D1 = 0 / -0.01 mm. GARANT Diabolo: Special geometry, coating and carbide for hard machining in the high-performance field.
Cutting Tools,End Mills,Carbide End Mills
Diabolo Solid Carbide Copy Slot Drill, For Hard Steels, TiAlN Coated, 0.8X10 Mm
Cutting Tools,End Mills,Carbide End Mills
Specifications of Diabolo Solid Carbide Copy Slot Drill, For Hard Steels, TiAlN Coated, 0.8X10 Mm | |
|---|---|
| Category | |
| Instock | instock |
