reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HSS Jobber Drill, TiN Coated, 9.2 Mm

About The 5 x DC.Standard core without core taper..4 mm Recommendation: Maximum drilling depth: L2 = LC 1

Precision ground point. With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC. Profile ground: High concentricity and pitch accuracy, drills for series production use. Standard core without core taper.

Cutting Tools,Drill Bits,Jobber Length Drill Bits

HSS Jobber Drill, TiN Coated, 9.2 Mm

Cutting Tools,Drill Bits,Jobber Length Drill Bits

Specifications of HSS Jobber Drill, TiN Coated, 9.2 Mm

Category
Instockinstock

Last Updated

HSS Jobber Drill, TiN Coated, 9.2 Mm
More Varieties

Rating :- 8.19 /10
Votes :- 1422
Size 0.5 to 10 cross section = 30x9 mm.
    • Precise concentricity for exact holes.

    Precise concentricity for exact holes.

    HSS-E-PM Parabolic Jobber Drill, TiAlN Coated, 6 mm.5 x DC. With form S point. Point geometry with rake angle correction.

    • Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    High performance drills for outstanding performance.HSS-E Jobber Drill, TiAlN Coated, 7.2 mm Precision holes due to optimized diamond point geometry and 4-face grinding.

    • High alignment accuracy and roundness of the pilot hole.

    High alignment accuracy and roundness of the pilot hole.

    Solid Carbide HPC Pilot Drill, Plain Shank, DLC Coated, 7 mm With 140 Deg point angle and special p6 cutting edge tolerance for optimum generation of a pilot hole.For deep-hole drilling deeper than 16xD a pilot hole is recommended, and for deep-hole drilling from 20xD to 30xD it is essential.5 x DC. Note: Flute length LC = L2 + 1.

    • The measuring faces are precision-lapped.

    The measuring faces are precision-lapped.

    0005 in Measurement deviation E MPE: ± 0. After 2 hours without movement- the control system shuts down the caliper automatically. The caliper is resistant to water and dust.

    • The abrasive caps can be replaced quickly and easily replace in direction of slots.

    The abrasive caps can be replaced quickly and easily replace in direction of slots.

    Aluminum Oxide Abrasive Cap, 150 Grit, Type: 1632L Application: The seamlessly formed abrasive caps slide on to the rubber body and are securely held in place by centrifugal force when the machine is running. optimized grit bonding yields very aggressive abrasion and a high material removal rate.

    • With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.

    . Standard core without core taper.HSS Jobber Drill, TiN Coated, 9.

    • Cylindrical shape A ZYA, without end cut.

    Cylindrical shape A ZYA, without end cut.

    . Shank : 3 mm Shape description: Cylindrical Head : 3 mm Head length: 13 mm Overall length: 40 mm Shank : 3 mm Application: Suitable for use with power tools and industrial robots, on almost all materials.

    • With point geometry shape C from size 2.4 mm Recommendation: Maximum drilling depth: L2 = LC 1.5 x DC.
    • Cylindrical shape A ZYA, without end cut.

    Cylindrical shape A ZYA, without end cut.

    .For deburring, edge breaking, cleaning, weld and surface preparation.