Taper Pin,Threaded,Steel,#4 X 2-1/2,PK5

.

4 ft-lb/in, Friction Coefficient 0.06 Percent, Plastic Hardness Rockwell M96.

., Cobalt, TiCN, Weldon Flat, Length of Cut 9/16 in, Overall Length 3 3/8 in, Shank Dia.2-Flute Cobalt 8% Square Double End CenterCut Finisher CTD HDC-2-TC TiCN 9/32x3/8x9/16x3-3/8 Not Applicable Square End Mill, 9/32 in Milling Dia.

0630.Screw Machine Drill Bit, Drill Bit Size 1.60 mm, Drill Bit Point Angle 140 Degrees , 4 Facet Point, High Speed Steel, TiN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.

Actuator, Valve Application Damper, Signal Type On/Off, Rated Torque 30 in-lb, Input Voltage 24V AC/DC, Output Signal Not Applicable, Electrical Connection Type Hardwired, For Use With Building Automation Systems Not Building Automation System Compatible, NEMA Rating 2, IP Rating IP54, Spring Return Spring Return, Time to Close 75 sec, Shaft Type 1/2 in Round, Shaft Rotation CW/CCW, Stroke Degree 95 Degrees , Mounting Type Direct Mount, Maximum Operating Temperature 122 Degrees F.

Tubing, Application Air, Fuels, Lubricant, Color Clear, Hardness Shore A 82, Inside Diameter 5/8 in, Jacket Color Clear, Jacket Material No Jacket, Material Polyurethane, Material Trade Name Versilon, Material Trade Number C-210-A, Maximum Operating Pressure 32 psi @ 73 Degrees F, Maximum Operating Temperature 175 Degrees F, Maximum Vacuum Pressure 29.9 in Hg, Outside Diameter 13/16 in, Overall Length 100 ft, Peristaltic Pump Compatible No, PEX Type Not Applicable.

044 in, Break Strength 5,500 lb, Strapping Length 50 ft, Strapping Wind Ribbon, AAR Approved No, Rolls per Case 1 Roll.Stainless Steel Band, Strapping Application 201 Stainless Steel Strapping, Strapping Width 1 1/4 in, Strapping Thickness 0.

251 in, Small End Diameter 0.-28, Pin Size #4, Large End Diameter 0.

Stainless Steel Band, Strapping Application 201 Stainless Steel Strapping, Strapping Width 1 1/4 in, Strapping Thickness 0.044 in, Break Strength 5,500 lb, Strapping Length 50 ft, Strapping Wind Ribbon, AAR Approved No, Rolls per Case 1 Roll.

Taper Pin, Thread Size 1/4 In.