12-10 AWG Non-Insulated Locking Fork Terminal 1/4 Stud PK500

2618.

00 mm, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 16.00 mm, Thread Limit 6H, Number of Flutes 3.

75 in, Outside Diameter 1.Double Acting Seal, For Nominal Shaft/Bore Diameter 0.254 in, Compatible Manufacturer Model Number 122026, SSU12OPN, Super12OPN, Compatible Series Super, Inside Diameter 0.125 in, Material Rubber, Stainless Steel, Seal Type Open.

Linear Pillow Block Bearing, System of Measurement Inch, Inside Diameter 1 5/8 in, Overall Length 3 5/8 in, Self-Alignment Self-Aligning, Material Aluminum Alloy, Dynamic Load Capacity 1,937 lbf, Steady State Speed 10 fps, Series Super, Maximum Operating Temperature 185 Degrees F, Minimum Operating Temperature Not Available, Housing Style Single, Pillow Block Type Open, Overall Height 3 in, Body Width 4.252 in, Includes Seals Seals Not Included, Flange Diameter Not Applicable.

Wall Switch, Color Gray, Current Rating 20 A, Switch Function Momentary, Switch Type Single Pole/Double Throw, Voltage Rating 120/277V AC, Wiring Method Back, Side, Horsepower Rating 1 hp, Locking Style Not Applicable, Maximum Wire Size 10 AWG, Minimum Wire Size 14 AWG, Number of Switches 1, Resistance Properties Shatter and Crack Resistant, Impact Resistant, Standards UL Listed, Switch Style Toggle, Wire Connection Type Screw Terminals.

25 in, Mounting Type Hammer On, cULus, Conduit and Cable Hangers.Rod Hanger, Flange Thickness 1/8 in to 1/4 in, Load Capacity 200 lb, Thread Size 1/4-20, Steel, Finish Corrosion Resistant Coated, Gray, For Use With Threaded Rod, Mounting Hole Diameter 0.

Fork Terminal, Contact Finish Tin, Contact Material Copper, Insulation Color Yellow, Insulation Coverage None, Insulation Material None, Maximum Operating Temperature 347 Degrees F, Maximum Voltage 600 V, Maximum Wire Size 10 AWG, Stud Size 1/4 in, Termination Style Crimp, RoHS Compliant Yes, Seam Style Brazed, Standards CSA Certified, UL Listed, Barrel Length 0.25 in, Connection Material Copper, Connection Type Crimp, Insulation Type Non-Insulated, Minimum Wire Size 12 AWG.

281 in, For Piston Groove Dia.625 in, Seal Material Buna N, Seal Durometer 70 Shore A, Color Black, For Groove Width 0.

25 in, Connection Material Copper, Connection Type Crimp, Insulation Type Non-Insulated, Minimum Wire Size 12 AWG.Fork Terminal, Contact Finish Tin, Contact Material Copper, Insulation Color Yellow, Insulation Coverage None, Insulation Material None, Maximum Operating Temperature 347 Degrees F, Maximum Voltage 600 V, Maximum Wire Size 10 AWG, Stud Size 1/4 in, Termination Style Crimp, RoHS Compliant Yes, Seam Style Brazed, Standards CSA Certified, UL Listed, Barrel Length 0.

U-Cup Seal,1-1/8"ID,1-5/8"OD,1/4"W,PK5 1.5 fps, Max.