reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Machine Reamer, With Morse Taper Shank, Uncoated, 17 Mm

About The 343000-343530. Application: For reaming through holes, as the chips are evacuated in the cutting direction. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer.Even number of teeth with irregular spacing

The hole is accurately round and free of chatter marks. Even number of teeth with irregular spacing. 343000-343530. Reamers finish ground for fit H7. Note: For suitable reducing adapters for tools with MT shanks see No. With Morse taper shank. Application: For reaming through holes, as the chips are evacuated in the cutting direction. Application for type of drilling: for through hole Tolerance: H7 Number of cutting edges Z: 8 Tolerance: H7 Flute length Lc: 54 mm Overhang L1: 132 mm Overall length L: 214 mm Number of cutting edges Z: 8 Morse taper MT size: 2 The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. Also suitable for blind holes due to the short chamfer lead.

Cutting Tools,Reamers,Chucking Reamers

Machine Reamer, With Morse Taper Shank, Uncoated, 17 Mm

Cutting Tools,Reamers,Chucking Reamers

Specifications of Machine Reamer, With Morse Taper Shank, Uncoated, 17 Mm

Category
Instockinstock

Last Updated

Machine Reamer, With Morse Taper Shank, Uncoated, 17 Mm
More Varieties

Rating :- 9.95 /10
Votes :- 1398
1 3/4 turns lead chamfer.

1 3/4 turns lead chamfer.

45 mm Height: 18 mm with spiral point on both sides for easy start to the cutting action and clean chip evacuation in the direction of cutting.

    • Tolerances: Neck Dia.

    Tolerances: Neck Dia.

    Ds: 4 mm 0 / -0.

    • Tolerance nominal Dia.

    Tolerance nominal Dia.

    Ds: 10 mm Corner rounding rv: 0.04 mm of teeth Z: 4 Helix angle: 40 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h6 No.05 mm Feed fz for side milling in titanium > 850 N/mm2: 0. Extra short cutter for maximum stability.

    • Straight major cutting edges with slightly honed edges and special flute profile produce short chips.

    Straight major cutting edges with slightly honed edges and special flute profile produce short chips.

    Solid Carbide Coolant Through HPC Drill, TiAlN Coated, 1 mm Note: Flute length LC = L2 + 1. Cutting chisel edge with high centering accuracy due to strong core and special point geometry..

    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.
    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    .64 mm Corner radius R1: 0.25xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed! Solid Carbide Copy Slot Drill, for Aluminum, DLC Coated, 0.

    • Application: For reaming through holes, as the chips are evacuated in the cutting direction.

    Application: For reaming through holes, as the chips are evacuated in the cutting direction.

    The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. Also suitable for blind holes due to the short chamfer lead. Even number of teeth with irregular spacing..

    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    .Solid Carbide HPC Drill for Alu, Plain Shank, DLC Coated, 3 mm For high-performance milling of aluminum materials.

    • Application: For reaming through holes, as the chips are evacuated in the cutting direction.

    Application: For reaming through holes, as the chips are evacuated in the cutting direction.

    The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer.

    • Note: Flute length LC = L2 + 1.5 x DC.

    Note: Flute length LC = L2 + 1.5 x DC.

    High roundness and alignment accuracy of the deep hole, thanks to 6 guide chamfers.