Coupling Nut, 1/2-13, Steel, Zinc Plated, 1-3/4 In Lg, 12 PK

MIDWEST FASTENER 32365 Machine Key Machine Key, Square End, 3 in L, 3/16 in Sq,.

MIDWEST FASTENER 31721 1-1/2" x 1.

.Self-Drilling Screw, #8 x 1-1/4 in, Zinc Plated Steel Pan Head Phillips Drive, 166 PK A self-drilling screw, or tek screw, is similar to a sheet metal screw, but it has a drill-shaped point to cut through the substrate to eliminate the need for drilling a pilot hole.

Lath screws, also known as modified truss screws, have a large, low-profile head.Sheet Metal Screw, #8 x 2 in, Zinc Plated Steel Truss Head Phillips Drive, 115 PK They often feature a self-piercing or self-drilling point.

.Sheet Metal Screw, #14 x 1-1/2 in, Zinc Plated Steel Pan Head Square Drive, 100 PK A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions.

.1/2"-13 x 2" Hot Dip Galvanized Grade 2 / A307 Steel Coarse Thread Carriage Bolts 50PK A carriage bolt has a domed or countersunk head, and the shank is topped by a short square section under the head.

Sheet Metal Screw, #8 x 3 in, 18-8 Stainless Steel Pan Head Phillips Drive, 100 PK A sheet metal screw has sharp threads that cut into a material such as sheet metal, plastic, wood, hard rubber, aluminum, and other comparable compositions..

A coupling nut is a long nut tapped from each side to meet in the middle, rather than all the way through in the same direction, used to connect two threaded rods end to end.

.

A coupling nut is a long nut tapped from each side to meet in the middle, rather than all the way through in the same direction, used to connect two threaded rods end to end..