S-1 Sealer, Quart Kit

Simple 1:1 mix ratio Ready-to-use viscosity, no thinning required Excellent wetting properties on most surfaces Applies by brush, roller, or spray Long pot life Waterproof Strong adhesion to most substrates with minimal surface preparation Remains flexible in cold temperatures No sanding required between coats up to 24 hours Resistant to salt air and water, and mild acids, alkalis, chemicals and solvents Not unleaded gasoline-proof. It is completely waterproof and suitable for use above or below the waterline. S-1 does not require sanding between coats if recoat time is less than 24 hours. Mixed at a simple 1:1 ratio S-1 is extremely effective at prolonging the service life of all woods, metals and fiberglass reinforced polyester. NOTE: We are unable to ship S-1 to zip codes that fall within the South Coast Air Quality Management District SCAQMD. S-1 is not recommended for gas tanks containing unleaded gasoline. It is resistant to salt air, mild acids, alkalis, chemicals and solvents. S-1 is a superb undercoat primer for most paints and clear finishes featuring strong adhesion to most substrates with minimal surface preparation. The SCAQMD includes all of Orange County; and the non-desert regions of Los Angeles and Los Angeles County, San Bernardino County, and Riverside County.•Premium Epoxy: S-1 Sealer is a 2-part clear penetrating epoxy sealer that's completely waterproof and suitable for use above or below the waterline•Easy To Apply: Mixed at a simple 1:1 ratio, this penetrating epoxy sealer can be applied with a brush, roller, or spray equipment and boasts an extended 24-hour pot life•Versatile Application: Use as waterproof sealer/primer for wood, metal, concrete, and reinforced polyester•Features: Our epoxy sealer is a superb undercoat primer for most paints and clear finishes featuring strong adhesion to most substrates with minimal surface preparation•Tips And Tricks: This epoxy resin sealer is resistant to salt air and water, mild acids, alkalis, chemicals and solvents and can be cleaned with lacquer thinner or denatured alcohol S-1 is a two-part Clear Penetrating Epoxy Sealer. It displays excellent wetting properties on most surfaces. S-1 is ready to use with no thinning required. S-1 has a long pot life and can be applied with a brush, roller or spray equipment.

Specialty Coatings & Additives,Epoxy Coatings & Sealers

S-1 Sealer, Quart Kit