Roller Conveyor With Covers, 18inW X 3L, 1.5in Dia. Rollers
About The 5in diameter rollers with polyurethane covers measuring 0. Equipped with a 12 Ga. These conveyors are excellent for both permanent and temporary conveyor lines often found in warehouses, shipping departments and assembly areas. Gravity curves and spur options can add to the versatility of straight conveyors
steel frame measuring 2-1/2in deep x 1in flange, powder-coated in Ultimation Blue, and 1.5in diameter rollers with polyurethane covers measuring 0.062in thick on 6in roller centers. This gravity conveyor is engineered with a 18in overall width from outside of the frame to the outside of the opposite frame, 16in between frame width the distance inside the frames from one side to the other, and 3' overall length. Use these short sections of 3 long conveyors to provide rolling support surfaces either individually or in pairs side by side. Legs if required are sold separately. This conveyor has a maximum load capacity of 318-pounds when the frame is fully supported. The rollers sit approximately 1/4in higher than the frame, allowing the load to protrude over the sides or ends as required. Gravity curves and spur options can add to the versatility of straight conveyors. These gravity roller conveyors include the conveyor frames and rollers. These conveyors are excellent for both permanent and temporary conveyor lines often found in warehouses, shipping departments and assembly areas. Equipped with a 12 Ga.
Conveyors,Roller Conveying
Roller Conveyor With Covers, 18inW X 3L, 1.5in Dia. Rollers
Conveyors,Roller Conveying
Specifications of Roller Conveyor With Covers, 18inW X 3L, 1.5in Dia. Rollers | |
|---|---|
| Category | |
| Instock | instock |
