This hose is for above deck primer bulb applications, and is not fire retardant. Silicone is not recommended as it may cause coupling retention issues. The fitting should slide into the hose with minimum, but some, resistance. This hose is EPA and CARB compliant. Oil based or other lubricants designed for rubber or plastic assembly should be used. Using fittings with oversized barbs may result in damage to the barrier layer. Over-sized fittings should not be used. Do not use wire ties or spring tension clamps. This will cause the layers to separate and block the flow of fuel. THV barrier layer to prevent permeation, polyester reinforcement for strength and a weather and UV resistant CPE cover. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Always use a lubricant when inserting a fitting. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. The gray color keeps hose cooler and helps prevent vapor lock. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels.
Marine & Watersport,Boat Motors & Parts
3370383 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8 X 10'
Specifications of 3370383 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8 X 10' | |
---|---|
Category | |
Instock | instock |