Keyway Broaching Toolholder, Long, 32 Mm Shank Diameter, 10 Mm
About The For lathes without Y-axis, please use eccentric bush No. In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability.22 mm. for slot width 14 mm, minimum pre-drill Diameter = 38
Through-coolant: yes Shank length Ls: 100 mm suitable for slot width m: 10 mm suitable for slot width m: 12 mm Reach L1: 126 mm Tool holder Diameter1: 25 mm Center offset L3: 14 mm Min. For machining Centers, use the alignment aid No. For lathes without Y-axis, please use eccentric bush No. for slot width 14 mm, minimum pre-drill Diameter = 38.22 mm. pre-drilling -Diametermin: 27.37 mm 290391, 290393 for exact setting of the Y-coordinate. In such cases, where possible, always use the optimum combination of holder and cutting insert identical size for maximum stability. Attention: Always use the minimum pre-drill Diameter to match the slot width e.g. Note: Individual holder sizes are for different slot widths. 290397 and a dial indicator to check the spindle orientation.
Cutting Tools,Broaches,Broach Holders
Keyway Broaching Toolholder, Long, 32 Mm Shank Diameter, 10 Mm
Cutting Tools,Broaches,Broach Holders
Specifications of Keyway Broaching Toolholder, Long, 32 Mm Shank Diameter, 10 Mm | |
|---|---|
| Category | |
| Instock | instock |
