Dowel Pin,Harden Stl,M5x10mm,PK50

5 mm, Dash Number Not Applicable, Color Black, Durometer 75A, Nominal Outside Dia.

5 mm, Actual Inside Dia.20 mm, Nominal Width 1. O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia.

5 mm, Dash Number Not Applicable, Color Red, Durometer 70A, Meets/Exceeds FDA, Nominal Outside Dia. Silicone O-Ring, 2.5mm Wide 19mm ID, PK25.

Range -15 Degrees to 400 Degrees F, FDA Approved FDA Approved 21 mm, Temp.

Abrasive Cut-Off Wheel, Abrasive Material Ceramic, Grit 36, Connector Size 3/8 in, Connector Type Unthreaded Hole, Overall Diameter 3 in, Overall Thickness 0.0625 in, Compatible Tool Type Cut-Off Tool, Die Grinder, Primary Material Applicationn Stainless Steel, Steel, Series NorZon Plus 5SGZ, Wheel Type Type 1, Maximum Operating Speed 25,465 RPM, Reinforced Status Reinforced, Bond Type Resin.

Angler Pipe Clamp, For Use With EMT, IMC, Pipe, RMC, Overall Length 3/16 in, Overall Width 1 1/4 in, Thickness 14 ga, Steel, Finish Electroplated, Color Silver, Strut Trade Size 1/2 in, Load Capacity 400 lb, Gauge 14 ga, Nominal Strut Size 1/2 in, Standards UL, SA, Package Quantity 10.

35, Water Absorption 0.4 Percent, Plastic Hardness Rockwell M120.

012 mm, Shank Length Tolerance +/-0.

Rod Stock, PAI, Grade Electrically Insulating, Plastic Length 8 ft, Plastic Diameter 3/8 in, Yellow/Brown, Plastic Clarity Opaque, Minimum Temperature -321 Degrees F, Maximum Temperature 500 Degrees F, Tensile Strength 20,000 psi, Impact Strength 2.4 Percent, Plastic Hardness Rockwell M120.0 ft-lb/in, Friction Coefficient 0.

Dowel Pin,,5.004/+0.