P392ALSS, Two Speed, Extreme Environment Hydraulic Hand Pump, 55 In3 Usable Oil

Brown Viton O-Ring, 2mm Wide 17mm ID, PK10.

0625 in, Compatible Tool Type Cut-Off Tool, Die Grinder, Primary Material Applicationn Stainless Steel, Steel, Series NorZon Plus 5SGZ, Wheel Type Type 1, Maximum Operating Speed 25,465 RPM, Reinforced Status Reinforced, Bond Type Resin.Abrasive Cut-Off Wheel, Abrasive Material Ceramic, Grit 36, Connector Size 3/8 in, Connector Type Unthreaded Hole, Overall Diameter 3 in, Overall Thickness 0.

Angler Pipe Clamp, For Use With EMT, IMC, Pipe, RMC, Overall Length 3/16 in, Overall Width 1 1/4 in, Thickness 14 ga, Steel, Finish Electroplated, Color Silver, Strut Trade Size 1/2 in, Load Capacity 400 lb, Gauge 14 ga, Nominal Strut Size 1/2 in, Standards UL, SA, Package Quantity 10.

Rod Stock, PAI, Grade Electrically Insulating, Plastic Length 8 ft, Plastic Diameter 3/8 in, Yellow/Brown, Plastic Clarity Opaque, Minimum Temperature -321 Degrees F, Maximum Temperature 500 Degrees F, Tensile Strength 20,000 psi, Impact Strength 2.0 ft-lb/in, Friction Coefficient 0.35, Water Absorption 0.

012mm dia,10mm L,PK50, Pin Type Press Fit, Material Steel, Material Grade/Class Ungraded, Finish Plain, Pin Diameter 5.Dowel Pin,,5.

Machine Screw, Head Type Flat, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size M6, Fastener Length 20 mm, Head Width 12 mm, Head Height 3.4 mm, Drive Size #3, Tensile Strength 60,900 psi, Dimensional Standards JIS B 1111, Pack Size Small, Type Standard Machine Screw, System of Measurement Metric, Thread Type Coarse, Package Quantity 25.

Hydraulic Hand Pump, Reservoir Capacity 55 cu in, Connection Size 3/8 in, Number of Stages 2, Pressure 1st Stage - Maximum 200 psi, Pressure 2nd Stage - Maximum 10,000 psi, Displacement per Stroke 1st Stage 0.151 cu in, Handle Effort - Maximum 93 lb, Housing Material Anodized Aluminum, Handle Material Fiberglass, Connection Type NPT, Cylinder Compatibility Single Acting, Flow Rate - Maximum 0.151 cu in/min, Includes Oil, Overall Height 7 in.687 cu in, Displacement per Stroke 2nd Stage 0.

Spotting Drill Bit, High Speed Steel, 120 Degrees , 1/2 in, TiN.

151 cu in, Handle Effort - Maximum 93 lb, Housing Material Anodized Aluminum, Handle Material Fiberglass, Connection Type NPT, Cylinder Compatibility Single Acting, Flow Rate - Maximum 0.151 cu in/min, Includes Oil, Overall Height 7 in.

Spotting Drill Bit, High Speed Steel, 120 Degrees , 1/2 in, TiN.