reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

HiRunER Precision ER Collet Chuck, SK 40, Projection: 70, For ER Collet: 40

About The 309757, 309758 for 11M and 16M, Fahrion ER collets No. 308901 309432, hook wrench No. Optional extras: Pull studs PS No. Supplied with: Precision clamping nut

308600 - 308806, PS wrenches No. The blue design ring must be removed for Fahrion HP 2m ER collets. Optional extras: Pull studs PS No. ER collets No. 309749 or 628520. 308901 309432, hook wrench No. 309617: 40 Note: Clamps only nominal Dia up to shank Dia tolerance h 10. 308901 309434. Use the precision collet chuck always in conjunction with the precision clamping nut No. Including RFID/Balluffchip bore, high-performance clamping nut up to 25000 rpm. Machining strategy: HSC Clamping range: 3 26 mm Overhang dimension A: 70 mm External Dia D: 62 mm Spare ER clamping nut No. Use in combination with Fahrion collets. Extremely strong holding force up to factor 2better than the standard ER chuck. Do not use the clamping nut in combination with a sealing washer. 309617. 628400 or torque wrench No. 309757, 309758 for 11M and 16M, Fahrion ER collets No. Advantage: 3 um radial run-out with a 2 um clamping nut, 6 um radial run-out with a 5 um clamping nut. Vibration reduction effect due to 2-part clamping nut size 11M and 16M 1-piece. 308820 - 308835, ER chuck keys No. Supplied with: Precision clamping nut. Application: For clamping tools with plain shank in collets to DIN 6499 Form A and B. All shanks are hard turned for smooth running. External and internal tapers are ground.

Machining,Collets,Chucks & Accessories,Collet Chucks

HiRunER Precision ER Collet Chuck, SK 40, Projection: 70, For ER Collet: 40

Machining,Collets,Chucks & Accessories,Collet Chucks

Specifications of HiRunER Precision ER Collet Chuck, SK 40, Projection: 70, For ER Collet: 40

Category
Instockinstock

Last Updated

HiRunER Precision ER Collet Chuck, SK 40, Projection: 70, For ER Collet: 40
More Varieties

HiRunER Precision ER Collet Chuck, SK 40, Projection: 70, For ER Collet: 40
Rating :- 9.73 /10
Votes :- 1375
Extremely small working arc of 5 Deg .

Extremely small working arc of 5 Deg .

5 mm Material: Chrome vanadium steel- matte chrome-plated .

    • Secure grip and higher torque transmission.

    Secure grip and higher torque transmission.

    wrench length L: 450 mm maximum jaw height h1: 14 mm maximum ring height h2 max: 21 mm Larger contact surfaces between bolt and tool. Exceptional tool life and wear resistance. Standard: DIN 3113 A / ISO 3318 / ISO 7738 Material: Chrome vanadium steel, chrome-plated.

    • 354760 VG1 or 355010 VGBASIC with reducer No.

    354760 VG1 or 355010 VGBASIC with reducer No.

    Note: Pre-setting e. Application: For internal machining with boring bars.5, Clamping Diameter: 8mm 313291 size 25 with additional reducing adapter No.

    • With RFID/Balluffchip bore.

    With RFID/Balluffchip bore.

    Cooling channel bore: lockable Clamping Dia D1: 12 mm Overhang dimension A: 130 mm External Dia D: 32 mm Dia D2: 24 mm 309906 180. Application: For holding end mills and drills with parallel shank to h6 tolerance.

    • Application: For clamping tools with Weldon shank to DIN 1835 Form B and DIN 6535 Form HB.

    Application: For clamping tools with Weldon shank to DIN 1835 Form B and DIN 6535 Form HB.

    End Mill Holder, with cooling channel bore, HSK-A 63 short, Clamping Diameter D1: 12mm HSK mating faces machined.Overhang dimension A: 80 mm External Dia D: 42 mm Spare clamping screw No. With coolant supply holes that can be plugged.

    • 309024 309320, ER clamping wrenches No.

    309024 309320, ER clamping wrenches No.

    Optional extras: ER collets No. Concentricity: 3 um Clamping range: 1 16 mm Overhang dimension A: 50 mm External Dia D: 42 mm Thread M: M16 Spare ER clamping nut: 25 309680 309740. 308981 309040, ER sets No.

    • Machining strategy: HSC Clamping range: 3 26 mm Overhang dimension A: 70 mm External Dia D: 62 mm Spare ER clamping nut No.
    • dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    Version suitable for NC similar to DIN 212 with straight shank dia for standard chucking especially in hydraulic chucks or high precision collet chucks.88 mm Tolerance: H7 Flute length Lc: 52 mm Overhang L1: 123 mm Overall length L: 170 mm Number of cutting edges Z: 8 Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.

    • Machining strategy: HSC Clamping range: 3 26 mm Overhang dimension A: 70 mm External Dia D: 62 mm Spare ER clamping nut No.

    Machining strategy: HSC Clamping range: 3 26 mm Overhang dimension A: 70 mm External Dia D: 62 mm Spare ER clamping nut No.

    308901 309434. Including RFID/Balluffchip bore, high-performance clamping nut up to 25000 rpm.Advantage: 3 um radial run-out with a 2 um clamping nut, 6 um radial run-out with a 5 um clamping nut.

    • dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    dia size 3.7 both ends with center points- dia size 3.8 both ends with center holes.

    dia size 1.HSS-E NC reamer, 5/8inch, Uncoated For highest concentricity and process reliability. Application for type of drilling: for through holes Tolerance: H7 Number of cutting edges Z: 8 Inch nominal dia corresponds to: 15.