reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Micro End Mill, DLC Coated, 1.5 X 3 Mm

About The 3 mm Overhang length L1 incl.44 mm Overall length L: 45 mm Shank Dia. Extremely tight tolerances ensure maximum accuracy. 0 / -0

Tolerances: Neck Dia. Note: At greater tool overhang lengths, use a reduced value for ap!Values for:slots milled from solid: ap = 0.25xDxap corrside milling: ap = 0.5xDxap corrTo calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!e.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia. D1 = 0 / -0.01 mm. of teeth Z: 2 Helix angle: 30 degrees Direction of infeed: horizontal, oblique and vertical Shank: DIN 6535 HA to h5 No. 0 / -0.005 No. Recess angle a = 16 Deg. Double relief ground with 2 hollow-ground chamfers. Ds: 4 mm Extremely tight tolerances ensure maximum accuracy. With advanced DLC sp2 coating. of teeth Z: 2 Flute length Lc: 2.3 mm Overhang length L1 incl. recess: 3 mm Recess Dia. For the highest demands regarding performance and precision in aluminium materials. D1: 1.44 mm Overall length L: 45 mm Shank Dia.

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Micro End Mill, DLC Coated, 1.5 X 3 Mm

Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.
116310.
More from GARANT & D1: 1.44 Mm Overall Length L: 45 Mm Shank Dia.
Search

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Micro End Mill, DLC Coated, 1.5 X 3 Mm

Category
Instockinstock

Last Updated

Solid Carbide Micro End Mill, DLC Coated, 1.5 X 3 Mm
More Varieties

Rating :- 9.98 /10
Votes :- 1402
Economy version.

Economy version.

Center cutting edge geometry for plunging.

    • The core drill cuts only a thin material ring.

    The core drill cuts only a thin material ring.

    HSS Core Drill, Depth of Cut 55 mm, TiAlN Coated, 15 mm Supplied with: Without ejector pin.

    • Special surface treatment.

    Special surface treatment.

    . Advantage: Conical holes 1:50 for taper pins to ISO 2339 DIN 1 and ISO 8736 DIN 7978 can be drilled in a single operation.

    • Special surface treatment.
    • Advanced micro-geometry, convex cutting edge and conical profile grinding to provide additional stability for the main cutting edge.

    Advanced micro-geometry, convex cutting edge and conical profile grinding to provide additional stability for the main cutting edge.

    Master Steel Solid Carbide Coolant Through Drill, Plain Shank, TiAlN Coated, 5. Robust drill design and optimized special point geometry for the best possible chip formation and reliable chip breakage with higher feed rates at the same time..

    • 116310.

    116310.

    Application: On machines for tapered through holes.86 mm Flute length Lc: 48 mm Overall length L: 86 mm Shank Dia. For taper pins to ISO 2339, 8736, 8737 DIN 1, 7977, 7978, DIN 258 and 1447.

    • Tolerances: Neck Dia.
    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.
    • Tolerances: Neck Dia.

    Tolerances: Neck Dia.

    005 No. recess: 3 mm Recess Dia.g: vf = 18000 rpmx fz mm/Zx z Through-coolant: no Tolerance nominal Dia.

    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.