reorder
tools-and-supplies.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New

Solid Carbide Copy Slot Drill, For Aluminum, DLC Coated, 3X40 Mm

About The Extremely tight tolerances ensure maximum accuracy.With advanced DLC sp2 coating. Recess angle a = 16 Deg. Double-relief ground with 2 chamfers hollow ground

D1: 2.92 mm Overall length L: 80 mm of teeth Z: 2 Helix angle: 30 degrees No. Note: At greater tool overhang lengths, use a reduced value for ap! D1 = 0 / -0.01 mm. With advanced DLC sp2 coating. Neck Dia. Extremely tight tolerances ensure maximum accuracy. For the highest demands regarding performance and precision in aluminium materials. Tolerances: Corner radius: Radius contour = 0 / -0.005 mm. Recess angle a = 16 Deg. e.g: vf = 18000 rpmx fz mm/Zx z No. recess: 40 mm Recess Dia. Double-relief ground with 2 chamfers hollow ground. of teeth Z: 2 Flute length Lc: 3.5 mm Corner radius R1: 1.5 mm Overhang length L1 incl. values for: copying: ap = 0.25xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!

Cutting Tools,End Mills,Carbide End Mills

Solid Carbide Copy Slot Drill, For Aluminum, DLC Coated, 3X40 Mm

HSS-E Center Drill, TiAlN Coated, 1 mm
Tolerances: Neck Dia.
More from GARANT? Recess Angle A = 16 Deg.
Search

Cutting Tools,End Mills,Carbide End Mills

Specifications of Solid Carbide Copy Slot Drill, For Aluminum, DLC Coated, 3X40 Mm

Category
Instockinstock

Last Updated

Solid Carbide Copy Slot Drill, For Aluminum, DLC Coated, 3X40 Mm
More Varieties

Rating :- 9.85 /10
Votes :- 1385
The core drill cuts only a thin material ring.

The core drill cuts only a thin material ring.

Note: For the lubrication of core drills, we recommend high performance cutting oil.

    • Special surface treatment.

    Special surface treatment.

    161200.Straight Shank Taper Pin Drill, Uncoated, 4 mm For finishing use taper pin reamers No. Advantage: Conical holes 1:50 for taper pins to ISO 2339 DIN 1 and ISO 8736 DIN 7978 can be drilled in a single operation..

    • Special surface treatment.

    Special surface treatment.

    . 161200. Conically increasing cutting edges with chip breaker flutes on the circumference.

    • Advanced micro-geometry, convex cutting edge and conical profile grinding to provide additional stability for the main cutting edge.
    • 116310.

    116310.

    9 mm large Dia. Recommendation: The pre-drilled hole is best produced using a straight shank taper pin drill No.Application: On machines for tapered through holes.15 mm Feed f in steel < 500 N/mm2: 0.

    • Tolerances: Neck Dia.

    Tolerances: Neck Dia.

    Note: At greater tool overhang lengths, use a reduced value for ap!Values for:slots milled from solid: ap = 0.

    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    With advanced DLC sp2 coating.For the highest demands regarding performance and precision in aluminium materials.

    • HSS-E Center Drill, TiAlN Coated, 1 mm

    HSS-E Center Drill, TiAlN Coated, 1 mm

    Ground from solid and relief ground, spiral fluted.

    • Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    Tolerances: Corner radius: Radius contour = 0 / -0.005 mm.

    Extremely tight tolerances ensure maximum accuracy.01 mm. recess: 40 mm Recess Dia.

    • HSS-E Center Drill, TiAlN Coated, 1 mm

    HSS-E Center Drill, TiAlN Coated, 1 mm

    Ground from solid and relief ground, spiral fluted.