Solid Carbide Copy Slot Drill, Diamond Coated, 1 X 30 Mm
About The 5 mm Overhang length L1 incl. For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite. Extremely tight tolerances ensure maximum accuracy.8 mm Corner radius R1: 0
D1: 0.96 mm Overall length L: 70 mm of teeth Z: 2 Helix angle: 30 degrees No. Note: At greater tool overhang lengths, use a reduced value for ap! D1 = 0 / -0.01 mm. With crystalline diamond sp3 coating. Neck Dia. Extremely tight tolerances ensure maximum accuracy. For the highest demands regarding performance and precision in Fiber-reinforced composites, CRP, GRP, and graphite. Tolerances: Corner radius: Radius contour 0 / -0.005 mm. Recess angle a = 16 Deg. e.g: vf = 18000 rpmx fz mm/Zx z No. recess: 30 mm Recess Dia. Double relief ground with 2 hollow-ground chamfers. of teeth Z: 2 Flute length Lc: 0.8 mm Corner radius R1: 0.5 mm Overhang length L1 incl. values for: copying: ap = 0.15xDxap korr To calculate the feed rate vf please use the actual speed of the machine the maximum possible speed!
Cutting Tools,End Mills,Carbide End Mills
Solid Carbide Copy Slot Drill, Diamond Coated, 1 X 30 Mm
Cutting Tools,End Mills,Carbide End Mills
Specifications of Solid Carbide Copy Slot Drill, Diamond Coated, 1 X 30 Mm | |
|---|---|
| Category | |
| Instock | instock |
