12 Pieces 3/4-10x2-1/4in Grade 8 #3 Dome Head Plow Bolts Plain, 12PK

.

Phillips Flat Head machine screws have a flat top with a conical bearing surface andare commonly used in countersunk holes where the screw head must sit flush with the surface of the material.

.5/32in Dia 1/4in-3/8in 56 Grip - Dome Head Blind Rivets Steel/Steel Mandrel Zinc, 200PK Dome Head Blind Rivets have a lower profile head that is approximately twice the diameter of the rivet body.

.1000 Pieces 1/4-20x2-1/4in Grade 8 Hex Flange Frame Bolts Phos & Oil, 1000PK Grade 8 Non serrated hex flange bolts have a smooth, non-rotating washer attached that does not bite into the surface it's being mounted to.

Grade8 Hex Cap Screws have6 radial lines on the head, and can withstand a minumum of 150,000 PSI tensile strength.100 Pieces 1/4-20x1/2in Hex Head Cap Screws Grade 8 Zinc Yellow, 100PK The most common setup for these bolts would contain a Bolt, 2 Flat Washers, Hex Nut or Hex Lock Nut, and/or Split Lock Washer..

.Phillips Pan Head machine screws have a pan-shaped head with a flat top and vertical sidesand are commonly used in electronics.

12 Pieces 3/4-10x2-1/4in Grade 8 #3 Dome Head Plow Bolts Plain, 12PK Carriage bolts are specially made for through bolting where its square neck prevents the bolt from moving as the tightening of the nut is done on the opposite end..

Phillips Pan Head machine screws have a pan-shaped head with a flat top and vertical sidesand are commonly used in electronics.

.

Phillips Pan Head machine screws have a pan-shaped head with a flat top and vertical sidesand are commonly used in electronics..