MTD/Cub Cadet Repl. V-Belt, 1/2Wx65L, Outside Length: 65

01 Percent, Plastic Hardness 65D.

Carbon Steel Flat Bar, Material Carbon Steel, Material Grade 1018, Thickness 0.000 in, Shape Flat Bar.

004 in, Yield Strength 60,000 psi, Fabrication Cold Finished, Rockwell Hardness Not Rated, Brinell Hardness 150, Tensile Strength 78,000 psi, Machinability Not Rated, Length Tolerance +/-3.000 in/-0.1215 Carbon Steel Rod, Material Carbon Steel, Material Grade 1215, Overall Length 36 in, Heat Treatable No, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Outside Diameter 4 in, Outside Diameter Tolerance +0.

000 in/-0.008 in, Overall Length 36 in, Overall Width 6 in, Fabrication Cold Finished, Heat Treatable Yes, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Yield Strength 55,000 psi, Tensile Strength 65,000 psi, Brinell Hardness Not Rated, Rockwell Hardness Not Rated, Machinability 78 Percent, Standards AISI 1018, ASTM 108, Appearance Unpolished.1018 Carbon Steel Rectangular Bar, Material Carbon Steel, Material Grade 1018, Thickness 0.

000 in, System of Measurement Inch, Width Tolerance +/-0.25 in, Thickness Tolerance +/-0.005 in, Standards -, Temper H02, Rockwell Hardness B78, Shape Rectangular Bar, Length Tolerance +/-1.

Frost Plug Heater,for Volvo 69-85.

Buna-N Roll, Material Buna-N, Shape Roll, Grade Flame-Resistant, Length 72 in, Width 40 in, Thickness 1/2 in, Backing Type Plain, Cell Type Closed Cell, Adhesive Type Plain Backing, Number of Adhesive Sides 0, Color Black, Density 16 lb/cu ft, Maximum Temperature 160 Degrees F, Minimum Temperature -20 Degrees F, Tensile Strength 70 psi, Texture Smooth, Firmness @ 25 Percent Deflection 3.5 psi, Material Skin None, Standards ASTM D1056/2B1/SBE41/II, Chemical Resistance Good, Oil Resistance Good.

V-Belt, 1/2"Wx65"L, Outside Length: 65" MTD/Cub Cadet Repl..MTD/Cub Cadet Repl.

Buna-N Roll, Material Buna-N, Shape Roll, Grade Flame-Resistant, Length 72 in, Width 40 in, Thickness 1/2 in, Backing Type Plain, Cell Type Closed Cell, Adhesive Type Plain Backing, Number of Adhesive Sides 0, Color Black, Density 16 lb/cu ft, Maximum Temperature 160 Degrees F, Minimum Temperature -20 Degrees F, Tensile Strength 70 psi, Texture Smooth, Firmness @ 25 Percent Deflection 3.5 psi, Material Skin None, Standards ASTM D1056/2B1/SBE41/II, Chemical Resistance Good, Oil Resistance Good.

MTD/Cub Cadet Repl..