.3105 Cobalt Reamer Straight Flute Dowel Pin Sizes

LINK CO-TL-379 1/4 X 2 Cobalt 90° Spot & Center Drill, Tialn Coat.

2-1/2" T-301 Cast Iron Non-Rising Stem Valve.

Designed to tow two (2) riders.

Made of heavy duty laminate material.PWC Sand Anchor With Buoy Holds approximately 30 pounds of sand or rock..

Type SHFlame ShapeDouble Cut Carbide BursMost popular geometry as the dual flutedirection reduces the contact patch on thework piece and therefore provides easieroperator control while still maintaining agood surface finish..

The Kodiak Cutting Tools® VI-PRO is an ultra-high-performance solid carbide endmill that uses variable index geometry to enable incredibly high-production milling.Premium Sub-Micrograin High-Performance Variable Index Solid Carbide End MillVariable Index GeometryHigher SFM and Heavier Chip LoadsCenter Cutting Carbide EndmillUsed in all slotting, roughing, profiling and finishing applicationsHigh Performance, chatter free machining provides versatility in use for all ferrous materials Designed for use in Alloy Steels, Cast Iron, Titanium, Stainless Steel, High Temp and all other ferrous materials up to 50HRcEccentric Relief on the cutting edge provides enhanced edge strengthTHE VI-PRO PERFORMS VERY WELL IN A WIDE RANGE OF MATERIALS INCLUDING: HIGH TEMP ALLOYS, STAINLESS STEELS, ALLOY STEELS, CAST IRON, HIGH TEMP NICKEL BASE ALLOYS, TITANIUM ALLOYS, EXOTICSALCRO-MAX Coating: is mostly suitable when machining tool steel and shows excellent behavior for wet and MQL (minimum quantity lubrication) conditions. This coatingis highly recommended for titanium, high temperature alloys, and hardened and tempered tool steels with 35 HRc or greater.

60 Degree Point AngleDoule-End Combined Drill and CountersinkHigh Speed SteelLong.

0002/+.0000+.M42 Cobalt MaterialStraight Flute Chucking ReamerDowel Pin SizesCobalt Dowel Pin Reamer Diameter Tolerances:Thru 1/2 1/2 to 5/85/8 to 1-1/21-1/2 to 2+.0000+.

60 Degree Point AngleDoule-End Combined Drill and CountersinkHigh Speed SteelLong.

0000+.